So I got the wiring to my new CBG 95% figured out. The kill switch is working, the knob is turning it up and down, but in the middle of turning the volume knob, I get a buzz for a second and then it goes away as I get to each end of the turn. Turn u
Read more…So I am going through what I want my new set up to do. This is what I have as far as parts..
I have a stero volume knob. I know, stero, I really just wanted a simple knob but our radio shack is going out of buisness and that is all they had left an
Read more…I've made a dog bowl resonator cbg. At first, I stringed it with the three thinnest strings of the pack, and it sounded great acoustically, with good volume, but I wanted a deeper sound, so I stringed it with a third, a fourth and a fifth from an aco
Read more…two tips to share and start this debate (since everyone has their own ideas at what is best) to start the stirring of the pot (pun intended)....
Trying to solder 6 ground wires to one pot lug was hopeless, so my current technique/tip is to give every
Read more…Howdy all...Was wondering if anyone has a suggestion about this.
I want to wire up 1 single coil w/ volume & tone, 1 under saddle piezo rod w/ volume & tone all tied into a master volume (no 3 way switch.)
This is as close as I've come
Read more…hi, does anyone know how to wire up two piezos to a volume pot and jack? many thanx....
Read more…Ok, newbee here, so apologies for any ignorance, but here goes: I've just collected the bit's'n'pieces that will finally get me started.
A very friendlyminded cigarshopowner in Oslo donated me a bunch of boxes yesterday - all with kinda different q
Read more…