Replies to This Discussion

Permalink Reply by David Carmony on September 23, 2011 at 4:13am

I use a dehumidifier in my shop.  I've got to dump the water a couple times each day.

• ▶ Reply

Permalink Reply by Josh Gayou (SmokehouseGuitars) on October 10, 2011 at 6:18pm

If possible, bring the necks into your house and let them dry out in an air conditioned environment.  I've had to do this in the dead of summer with headstock veneers.

• ▶ Reply

Permalink Reply by Bad Finger (Eric) on October 11, 2011 at 6:05am

I work in the basement (dry) with a dehumidifier set on 50.  It drains into my A/C condensate pump so I never have to empty the bucket.  :)

• ▶ Reply

Permalink Reply by Mr.C on October 11, 2011 at 12:46pm

What u need is dehumidafire.pardon the spelling

• ▶ Reply

Permalink Reply by keith peterson on December 1, 2011 at 9:10am

I have switched from carpenters glue to fast dry wood epoxy for building home made guitars and then use the would glue all the way around the inside when done with the band saw work. The glue on the inside of the guitar never shows and the expoxy is stronger that wood glue.......super fast set up meens I am off on another peice and dont have to wait....love it...

• ▶ Reply