Hello, I'm making my first cigar box guitar, actually a wine box guitar 

a few pictures :

As you can see the end of my neck is beveled, but not in the common way

Can I do the holes for the strings following this bevel ? I've never seen that on a cigar box

thank you ;)

And sorry for my english I'm french

Views: 823


Reply to This

Replies to This Discussion

I've seen this on builds before.

They seem to have worked out just fine.

I did it myself once.

Also, there are many French people on this site!

Certainly. It shoud look great.

Ok thank you !

Yes I found this site on a french site

I also love american blues and cigar box guitars, that's why I try to do mine !

If you have any suggestions about my work I'm open ;)

Are you putting a fingerboard on that neck? because otherwise it loos like the face of the neck sits below the top of the box. that might be a problem to consider. Otherwise looks like a great start.



"Can I do the holes for the strings..."

Mais oui; bien sur! Sorry for my French ;-). Yes, I've seen examples of this type of neck end with staggered string holes here on CBN; you'll have to search awhile to find a pic, but they exist. It is one form of tonal compensation; you'll want to keep checking your bridge location when you intonate, unless this is going to be an unfretted slide build, because your string lengths, and thus your string end nodes, will also be different lengths at the head stock end. It looks like a nice long, deep box; should have good tone.

Welcome to the Addiction! The wine makes it easier to deal with ;-).

Yes Brendan I have a pine fingerboard

ahah and thank you Oily, I've found a picture

Are you sure it's different for the intonation ? because it doesn't change the vibrant lenght of the string if I put the bridge right

But yes it will be unfretted

I hope for the tone, the wood is a bit heavy but we will see, and I'll maybe put a pick up.

Thank you for all, it's a very nice forum !

Actually it should work. The thinnest string will have the flattest break angle at the bridge, the thickest "bass" string will break at much sharper angle. This should equalize the pressure on the soundboard (tension on the highest/thinnest string is AFAIR bigger than on the lowest/bass string). Not sure if the difference will matter, anyway.


I'm working hard, I'll show you pictures soon


No, it won't change the intonation, as the scale length is nut to bridge. But it will slightly affect the compensation, and as our brave sailor has said, it will also affect the break angle of individual strings, which will affect the pressure on the top, and thus your tone. It's all subtle trade-offs, that will only start to matter, maybe, depending on how many builds you do, and how crazy deep into this you wanna get. Most builders just build, with amazingly good results. The rest is just Cigar Box Geekspeak. ;-)

So I do this one with my feeling ;)

And the next will be better

My guitar is almost finish, but I don't know how many space put between the strings ?

Well, I'd put 3 spaces between 4 strings, or 2 spaces between 3... ;-)

I personally find the ukulele string spacing quite comfortable. Something like 9-11mm at the nut and 11-13 at the bridge. But my fingerboard is 4cm wide. Your mileage may vary...


The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources


r.e. testbed...

Started by James Pobog in Building Secrets, Tips, Advice, Discussion. Last reply by James Pobog 19 minutes ago. 3 Replies

Cases for CBG's

Started by Kevin Keating in Cool gear discussion - that's not cigar box related. Last reply by KOOL DOG HOOCH 3 hours ago. 15 Replies

Latest Activity

Dave Lynas liked Miku's photo
13 seconds ago
Dave Lynas liked Miku's photo
1 minute ago
Dave Lynas liked Miku's photo
2 minutes ago
Dave Lynas commented on Miku's photo

Miku 4 Amped

"Absolutely beautiful. Medieval art is wonderful."
3 minutes ago
Dave Lynas liked Miku's photo
5 minutes ago
Dave Lynas liked Miku's photo
6 minutes ago
Dave Lynas commented on Francis Camillo's photo


"I think so as well Uncle. It’s a beauty Francis."
7 minutes ago
Dave Lynas liked Francis Camillo's photo
9 minutes ago
Dave Lynas liked Dave Lynas's video
12 minutes ago
Dave Lynas commented on Dave Lynas's video

Big Box Cheroots Part 5

"Uncle I love your Down in the Valley. Too bad you’re in the Clink. But it has great…"
12 minutes ago
Dave Lynas commented on Dave Lynas's video

Big Box Cheroots Part 5

"You did hear it Uncle. The music on this video is the Big Box Cheroots. I laid down the bass and…"
13 minutes ago
James Pobog replied to James Pobog's discussion r.e. testbed...
"To be perfectly honest with you, and no joking around, I have no idea why I'm doing this. It…"
19 minutes ago



© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->