6 string

David Davies January 20, 2011 at 6:51pm

Thanks for all the tips guys I do appreciate it. Ill let you all know how it goes.... Dave

Doctor Steve January 20, 2011 at 3:15pm

Is the neck bolt on? If so, then should be ok as long as you have the neck block well secured in the box.

Jason W. January 19, 2011 at 9:56pm

If you're wanting to go full electric power you could potentially fill the whole box with wood, depending on how big it is, then cut out the space you need for the guts. That will give a nice solid mass to anchor your neck to.

Mark Myers January 19, 2011 at 9:44pm

Well you do need to reinforce the box. You need to make a nice solid piece that connects the neck to where all your pressure is going to be.

David Davies January 19, 2011 at 9:10pm

Thanks Dan that was my thinking. Im new to this so i like to get advice from those who know more.... Dave

Dan Sleep said:

I would think the neck would be OK, but like you are already planning, I would reinforce the box so that you don't have a collapse of the joint between the neck and the box. A cigar box is not all that sturdy to begin with, so don't skimp on the reinforcing materials.

Dan Sleep January 19, 2011 at 8:24pm

I would think the neck would be OK, but like you are already planning, I would reinforce the box so that you don't have a collapse of the joint between the neck and the box. A cigar box is not all that sturdy to begin with, so don't skimp on the reinforcing materials.

Forums

6 string

Replies