We got in order of appearance Bronze! Brass! Stainless and another stainless!$10 a pieceAll you have to do is bend the end part over and drill your mounting hole. You can make it long or short depending on your box size and stuff that is why it does not come pre drilled. I suggest putting it in a vice and carefully bending it over with a hammer and maybe some blue tape covering it to prevent scratching it.You just poke the ball end of your string in the hole and pull it in the slot no more running the string all the way thru a small hole. You can use this for a 1...2....3...4 ...or 5 string guitarTell me what you ya think and message me if you want some!These are the very first ones !Just holler at me if you are interested
Read more…
Me too Bob next round will these were the test ones
The guy cutting them for us did not know what way was up on the part or probably even what the part was we just told him to put the star in there and this is what we got.
Another change is the string holes are going to be clustered together in a tighter spot to make it work better for dulcimer strummers too.
Comments
Love it brother simple and straight! I'm buying.
Me too Bob next round will these were the test ones
The guy cutting them for us did not know what way was up on the part or probably even what the part was we just told him to put the star in there and this is what we got.
Another change is the string holes are going to be clustered together in a tighter spot to make it work better for dulcimer strummers too.