Wiring a volume pot to a piezo pick up

I've built many guitars and wired them with just a piezo pick up. Sounds great and is easy to do, with my limited electrical skills. I tried to take my builds to the next level by wiring a volume pot over the weekend. It works but there is a slight buzz. If I touch the metal on the jack it goes away, so I need a better ground. Anyone else have this problem? How can I fix it?

 

Thanks

Views: 2064

▶ Reply to This

Replies to This Discussion

Permalink Reply by Wes "I'm Baaaaack" Yates on February 28, 2011 at 12:33pm
Ground it like you mention. That's about it.

-WY
Permalink Reply by Big Guy Blues (Morgan) on February 28, 2011 at 12:46pm
Ground it where?
Permalink Reply by Big Guy Blues (Morgan) on February 28, 2011 at 1:10pm
Here's how I wired it.
Attachments:
Permalink Reply by Henry Strat-o-varius Lowman on February 28, 2011 at 1:40pm
Looks right to me. Possibly a bad solder joint.
Permalink Reply by Big Guy Blues (Morgan) on February 28, 2011 at 1:43pm
Hmmmmmmm, I've done it on 2 guitars, same problem.
Permalink Reply by Wes "I'm Baaaaack" Yates on February 28, 2011 at 2:19pm
Agreed with Henry. Bad solder. Been there. Done that.

- WY
Permalink Reply by Wade on February 28, 2011 at 2:30pm
probably already know this, but a little sandpaper to rough up the surface(pots, jacks) gives better adhesion to what your soldering.

Wes "Moanin' Mule" Yates said:
Agreed with Henry. Bad solder. Been there. Done that.

- WY
Permalink Reply by Big Guy Blues (Morgan) on February 28, 2011 at 2:38pm
I'll try that, thanks. I'll let you know what happened.
Permalink Reply by Wes "I'm Baaaaack" Yates on February 28, 2011 at 3:44pm

You know Wade, I do that but I thought that the metal the case is made of resists solder. That or has some coating from the manufacturer to resist corrosion. I dunno. I sand it up.

 

Also I find that the case will absorb heat too fast and the solder won't adhere/bond well enough. Again, I dunno.

 

-WY

Permalink Reply by Big Guy Blues (Morgan) on February 28, 2011 at 5:19pm
The solder is stuck on there really well, I couldn't pull it off If I wanted to.
Permalink Reply by Wes "I'm Baaaaack" Yates on March 1, 2011 at 12:38am

Bad pot? I've had that happen by applying too much heat before. Somehow it burns it up inside. How hot is the iron and/or did you have to use excessive time soldering?

 

-WY

Permalink Reply by Big Guy Blues (Morgan) on March 1, 2011 at 5:41am
That's possible, I'm pretty new to soldering.  I'll try rewiring it up with a new pot this week end.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Forum

Song lyrics for Steve's new song

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 10 hours ago. 4 Replies

AI Search Query - Curious Answer

Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER yesterday. 4 Replies

UK - Best Place to Buy Cigar Box's

Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies

Are metal frets necessary?

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies

Joseph J. Rogowski about Current Based Pickup Design

Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Flat bucker under box top. Any Success?

Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies

Has anyone tried this? Thoughts?

Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies

just came accross this pickup idea on youtube.

Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply

VIDEO: Building a CBG with limited resources.

Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply

Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost

Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

No Harmonics

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies

Camera suggestions?

Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies

CBG site issues, continued.

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies

Anyone used a violin-style tailpiece on a CBG?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies

Guitar for the grandson

Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies

Building with vintage paper/pressed board cigar boxes.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments

.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment

Latest Activity

Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Here is a link to CBG 101.   https://www.youtube.com/watch?v=jy04bkM_JSc"
2 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
2 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
2 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
2 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
2 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
2 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Old portable heater

"Yup.  Good eye deer.  Maybe find a use for that fan too.  If not on this amp,…"
2 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

"I was whistling it!"
2 hours ago
Uncle John commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"Looks and sounds good. Built under the solar eclipse!"
2 hours ago
Uncle John commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Pretty good song."
2 hours ago
Uncle John commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"I thought you were going to say 'cross roads'.  Rockin' along the roads. …"
2 hours ago
Uncle John commented on Gary O'slide's video
Thumbnail

Western song cigar box guitar @RhialtoPurple

"Pretty guitar. Sounding good too."
2 hours ago

CigarBoxGuitar.com Knowledgebase Articles

Add a Panel-Mount Gain to a C. B. Gitty Amp Board

Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers

A Step-by-Step Guide On How To Make a Straight Headstock

Cigar Box Ukulele Kit Assembly Guide

Advanced Cigar Box Guitar Building guide by Joshua Gayou

“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->