I seem to have an issue with necks not keeping flat/straight.  I usually use the 1x2 neck wood and double up for the heel into the box.  Woods I have readily available is red oak and poplar (which is ridiculous since I live in the furniture capitol of the US...not IKEA!). I then use a .25 inch fret board.  I have a current build where nearly every fret buzzes and I have nearly worn out the hard-tail (HT) bridge with adjustments.  It seems to get better as I fret down the neck near the the 12th.  All frets are level.  This is my 1st HT bridge thinking I could get easy adjustments from that.  String height is about 2-3mm at the nut and is larger at the 12th depending on HT bridge setting.  I have moved the neck a bit for back angle with not much difference.

I tried to use lighter strings, thicker necks carved from 2x2, but those aren't as comfortable.

What wood types are y'all using?

Would I have a more stable neck if I laminated different wood vertically for the neck?

I would rather not go a truss rod route, since thousands are made without one and because of the cost.

I realize I may be having a couple issues at the same time.  Any suggestions? 

Views: 377

Reply to This

Replies to This Discussion

Hi, you are correct in saying that a Bowd up neck will not cause fret buzz Carl, but l do see many bowed up necks with frets that buzz. This is normally caused by uneven frets. In this case creating less relief has to be done in conjunction with other work, to overcome fret buzzing.

Taff

Doctor, I'm having trouble....my fingers keep bleeding, and my guitar plays out of tune...But my neck is very straight.
Taff

Fingers? Are they still there!!! I’m sure that was a case of sitting in the case somewhere, being forgotten? 

Hi BrianQ, you should see the case it looks like it was left out in a rainstorm and forgotten.

Taff

Are you starting with a truly straight and true neck before you put the frets in? It sounds obvious, but after gluing on the fretboard you need to level it and check it with a good heavy straight edge. You say that all the frets are level but how are you checking this? After you have installed the frets you need to check them  with straight edge to look at the overall neck  and use a fret rocker to identify if you have any high or low frets. If necessary you may need to dress all the frets to get them level and reprofile them. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

Latest Activity

A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
1 hour ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
2 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
2 hours ago
Uncle John commented on J. D. Woods's photo
7 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
7 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
7 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
7 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
7 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
7 hours ago
Uncle John commented on Darryl Tuttle's photo
Thumbnail

Old portable heater

"Yup.  Good eye deer.  Maybe find a use for that fan too.  If not on this amp,…"
7 hours ago
Uncle John commented on Doug Thorsvik's video
7 hours ago
Uncle John commented on Dar Stellabotta's video
Thumbnail

Cigar Box Guitar 106 now for sale 🙌

"Looks and sounds good. Built under the solar eclipse!"
7 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->