Comment

Comment by Doug Thorsvik on April 6, 2021 at 11:26am

Here are some photos of the holders I made to do the roundover on the neck. I do 2 at a time and just flip everything over. This design takes advantage of the clamps I have on hand.

Comment by Gavin on April 6, 2021 at 9:31am

Thats great didn't want to spend too long on it just to sell

I think I will try the router is it on  table

Comment by Doug Thorsvik on April 6, 2021 at 9:13am

I used to use a rasp, followed by files, followed by a lot of sanding! Now I use router with a 1/2, 5/8, or 3/4” roundover bit (depending on the neck) followed by a little sanding. Takes less time and a lot less muscle!

Comment by Gavin on April 6, 2021 at 8:20am

Hi how does anybody shape the back of their neck 

Comment by Gavin on March 30, 2021 at 9:00am

Thanks all for some great comments  where do you all live

Comment by Southern Ray on March 30, 2021 at 8:42am

 Very good-lookin' build, Gavin! Love the layout and choices of the drain-screens. Corner protector on the headstock is a nice unusual detail as well.

Cheers!

Comment by Doug Thorsvik on March 29, 2021 at 11:02am

You are off to a great start Gavin! Your builds look like you’ve been doing this for a while!

Comment by Gavin on March 29, 2021 at 10:05am

Thanks for comment new to building

Comment by Doug Thorsvik on March 29, 2021 at 10:03am

Another beauty! All the elements tie together nicely! Very stylish builds Gavin.