Logo using tracing paper

Just posting a quick tip on how I have added logos printed on to paper 

Here I have printed a logo on plain paper and tracing paper.

The plain paper is glued to a  piece of scrap and the tracing paper is glued to the headstock of a Darth Vader star wars books tin uke. I was careful cutting to the line on the plain paper version and cut a mm or three outside the line on the tracing paper. The more I look at it the more I think the plain paper one looks pretty good too. 

I have in the past recessed a round logo like this on paper in a shallow hole made with a matching 25mm forstner bit  and covered in clear epoxy. The tracing paper is not as effective with coloured inks.

Where the tracing paper method is clearly superior is for borderless logos (pun intended).

If you print at the top of the paper and trim it level you can reuse the rest of the paper most times.

I use a water based inkjet so superglue and spray varnish both worked well for embedding. I have used water based glues on stuff printed on a laser printer that ran when I tried to use superglue. 

Note: Tracing paper not baking paper.

Views: 205

▶ Reply to This

Replies to This Discussion

Permalink Reply by KOOL DOG HOOCH on August 21, 2019 at 9:58am

You can buy wet slide off decal paper for your printer, just lightly clear coat before soaking in water.

Permalink Reply by Titch the Clown on September 18, 2019 at 12:57pm

I have changed my technique slightly after someone on Ukulele underground luthiers lounge complained that water slide decals were easy to scratch, notably when sanding between coats of varnish.

I tested printing in reverse and laying the image face down. as you can see in the image below the reversed image has no sanding damage and the upright image is missing bits already with only a light sand.

Here is a more full size pic - before superglueing down

After superglueing down

Permalink Reply by KOOL DOG HOOCH on September 18, 2019 at 3:14pm

Thank you for the heads up! I've been using my electric  label maker with clear labels in it for now

Permalink Reply by Amir Sagi on September 18, 2019 at 10:12pm
Hi

I would go with the water slide off decal for the logo, used it in the past. Now I do mother of pearl inlau, it takes practice, but it worth it

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources

Forum

Song lyrics for Steve's new song

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. yesterday. 4 Replies

AI Search Query - Curious Answer

Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER on Wednesday. 4 Replies

UK - Best Place to Buy Cigar Box's

Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies

Are metal frets necessary?

Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 20. 7 Replies

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies

Joseph J. Rogowski about Current Based Pickup Design

Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Flat bucker under box top. Any Success?

Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies

Has anyone tried this? Thoughts?

Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies

just came accross this pickup idea on youtube.

Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply

VIDEO: Building a CBG with limited resources.

Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply

Free PDF Download: Vintage Guitar Effects Plans - 1967 Fuzzbox and 1969 Treble Boost

Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

No Harmonics

Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies

Camera suggestions?

Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies

CBG site issues, continued.

Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies

Anyone used a violin-style tailpiece on a CBG?

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies

Guitar for the grandson

Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies

Building with vintage paper/pressed board cigar boxes.

Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies

Blog Posts

I'll be fashionable this summer =)

Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments

Everyone can make CBG. And I did it =)

Posted by Vlad on March 6, 2024 at 2:32am 5 Comments

.✨. Cover Me ..♪♫•*¨*•. ~ the Delta Blues Outlaws

Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments

Q&A with Arkansas-based talented blues musician Billy Jones, one of the very best authentic modern artists

Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments

Big Power Bank for Small CBG =)

Posted by Vlad on February 11, 2024 at 1:06am 1 Comment

Latest Activity

Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Don't Worry Be Happy: 3D Printed Cigar Box Guitar

"Wish I could too Uncle John!!!"
4 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

I Can Only Imagine: 2-String Chugger License Plate Cigar Box Guitar

"Thanks Uncle John! I’m always delighted when other Slingers choose it to play."
4 hours ago
J. D. Woods commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Hi Uncle John, Ha, ha!! So glad you asked, I wondered when somebody was gonna notice! I'll try…"
4 hours ago
A.D.EKER commented on AGP #'s photo
Thumbnail

AGP #530 - ''Pink Floyd''

"Colorfull Build  AGP # the last colorfull song they will  ever build ,the feud is going…"
10 hours ago
A.D.EKER commented on Poorness Studios's video
Thumbnail

Jose Cuervo | Shelly West cover on 4-string CBG

"its good to hear you are part of the "Old Content" did not get any of this ,but you…"
10 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

There i was Standing at the ..... BCB - A. D. Eker 2024

"Good morning UJ ,How are you ? hope you are fine! i did say "CrossRoads",Blues Rock its a…"
10 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Here is a link to CBG 101.   https://www.youtube.com/watch?v=jy04bkM_JSc"
16 hours ago
Uncle John commented on J. D. Woods's photo
Thumbnail

Current Instrument Line-Up

"Nice line up.  Unusual pick guard on the big git that looks like a Martin.  What is that…"
16 hours ago
Uncle John commented on Ghostbuttons's photo
Thumbnail

Four projects

"Nice, nice trio."
16 hours ago
Uncle John commented on Crazed Fandango's photo
Thumbnail

Frethound 4 String

"Looks great.  That looks like one I could really like playing.  Four strings too. …"
16 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Anti-Body Guitars 18,19 and 20

"Great theme, workmanship and guitars!"
16 hours ago
Uncle John commented on David Hopkins's photo
Thumbnail

Angel 2x Anti-Body #17

"Very, very nice.  I hope it got to a good home and that it will be enjoyed.."
16 hours ago

CigarBoxGuitar.com Knowledgebase Articles

Add a Panel-Mount Gain to a C. B. Gitty Amp Board

Cigar Box Guitar Building Tip: Neck Reinforcement with Humbuckers

A Step-by-Step Guide On How To Make a Straight Headstock

Cigar Box Ukulele Kit Assembly Guide

Advanced Cigar Box Guitar Building guide by Joshua Gayou

“Open A” AEA Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open E” EBE Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open D” DAD Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

“Open G” GDG Tuning on your Cigar Box Guitar: 4 Methods, with String Sizes & Sound Clips

Diatonic (Dulcimer-Style) Fretting – What it is, How and Why to Use It

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->