Not that we drink a lot in our house, but I have a growing collection of wine bottles with neck size just perfect for slides. I've goggled cutting techniques for these and the most common approach is to use a glass cutter to etch a line around the neck, then dip the neck into boiling water to raise the glass temperature, then plunge it into a bucket of ice water. The sudden contraction causes the neck to break along the etched line.
Well, it works, sort of. I've had several bottles break off cleanly while other times, the fracture line runs up the neck instead of around.
The one thing that is pretty consistent is that the hot/cold method does eventually result in the neck breaking off. Unfortunately, the fracture line is often jagged and rough.
So, does anyone have a sure fire recipe for getting a clean break on a wine bottle so I can add to my slide collection?
Thanks
T
Tags:
I have used a cutoff wheel on a bench grinder and then just tap the neck gently on my 1/4" steel bench top and it eventually snaps off - I think you will always get an uneven break - I just grind that down, rubbing on concrete etc. As long as it's smooth enough not to cut - the jaggedness adds character !!
Thanks for the idea. I considered an abrasive cut off wheel, but wondered about the glass-dust flying around. I also considered a powered tile cutter. It has a pump to stray water on the cutting area and keep the dust under control. Just don't know how I would hold the bottle while cutting.
well i gotta admit ,, this is where i failed ,, ive tried the class cutter and flame and cold water trick. tried the hack saw thing etc ..
and im still the "make 10 , break 7" guy .
my only hope was to call them "barfighter slides " and sell en like that . ;-)
pretending i left them jagged and just sanded down on purpose . ;-)
but i hear the dremmel diamond wheel is the way to go .
I've tried the hot and cold method none worked.
so I didn't bother any more.
Have nothing new to add but have cut a few and always had the best luck with a dremel type tool and a diamond wheel seems to work the best , but still can get a bit ragged cut. I just use a grinder to clean it up of any jagged edges and that is about as good as it gets for me... had no luck with the heat cold thing at all..
I think probably you will find that bottles differ one to the next. certain will cut well others won't.. just the nature of the beast I think...
I'm leaning toward grabbing my tile cutter. It hasn't had any work in over a year. Maybe crank it up. fill the tray with water and give it a go. I have plenty of spare bottles.........
I found this...
Wine Bottle Cutting 30 seconds Perfect Edge Bottle Cutter
This guy looks like he knows what he's talking about. At least his video shows him actually making a cut/break.
The gadget for scoring bottles is sold at Hobby Lobby for $25 USD, but I bought a $4.99 hand-held glass cutter instead. I plan to lay the bottle on a miter box, brace it, and roll it around--much like the Plan B he mentions in the video. I can steal the wife's Brown Betty tea pot for boiling water. I'm gonna' give it a try.
I'll post the results if my fingers are still attached...
TN
I tracked it down on Amazon must to check ratings. A lot of them (over 800). A lot of 5-stars, but nearly 100 one stars. Overall, it looked like about half the ratings were 3-stars or less. That being said, It might be a worthwhile tool. At $16.00 it isn't overly expensive and if purchased from Amazon they will take it back for a year if you don't like it.
May give one a try.
I clamp 2 2x4 pieces of wood at a right angle on a table to hold the bottle while I turn it, with another pice of wood under the neck so it does not dip and turn the bottle while scoring only once around with a standard glass cutter. I put a piece of blue painter tape around to follow to keep my line absolutely straight. Once scored I pour boiling water slowly on the score while turning the bottle and then put it into a can of ice water. Then I repeat this 2 or three times until the end falls off. After breaking the very end off then I score farther down the neck for the second break. I finish these off by grinding (by hand) on wet dry sand paper on a board. I start with 60 and then 220 and 400 and 600. The breaks are generally good, but the bottle glass usually has a concave dip all the way around. But patient grinding will get rid of all flaws. Good activity while watching TV or conversing with friends. I also use a balsamic vinegar bottle (Colavita, the short bottle with the long neck) as they have the straightest necks of any bottles I've found. At least for the 1.5" I need for my CBGs.
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by BrianQ. 9 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by A.D.EKER yesterday. 4 Replies 0 Likes
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango on Tuesday. 4 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods Apr 17. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!