Replies to This Discussion

Permalink Reply by Ron "Oily" Sprague on August 6, 2013 at 4:09pm

Everything. I think. Box volume, how stiff the box is, thinness of top, coupling of strings to saddle to bridge to top, finding the box's sweet spot, finding the tuning where that particular box resonates, finding the right strings and tension, neck material...all of it.

• ▶ Reply

Permalink Reply by Kevin M. Kraft on August 7, 2013 at 2:10am

Thanks, Mr. Sprague!

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on August 7, 2013 at 4:21am

Oh, I forgot to add, that indefinable something called "mojo." ;-)

• ▶ Reply

Permalink Reply by Kentucky Mojo on August 7, 2013 at 5:46am

It's all about vibration. More transfer of vibration from the strings to the box the better... not to mention a sound hole that allows those vibrations to escape the box. A nice thinner box top and bottom will help that, as well as how well the neck and all string contact points marry to the box/body.Simple things like gluing the lids shut to let the vibrations transfer from the top to the box body helps. Allowing for bracing that is not killing the tops vibrations. I would say that it's a combination of how everything fits together and how well the vibrations transfer from on part of the guitar to the other. Vibration = sound.   

• ▶ Reply

Permalink Reply by terry harris on August 7, 2013 at 5:49am

I've heard it said that it is doing a lot of little things right.

• ▶ Reply

Permalink Reply by Yankee Dog on August 11, 2013 at 3:13am

I have found that the neck stiffness affects the sustain. I tried a couple with aluminum necks. the sustaion was awsome. OK, it wasnt so pretty, but it sounded good.

 

 

• ▶ Reply