I'm working on the first of what I hope are many box guitars. I read a post by Ted I think, with a diagram of a single coil PU, that he had supplied, with two volume and one control hooked to a 3-way switch. One volume control was for the single coil, the other pot was for a Piezo.. This is a config. I want to use. But, because I;m not electronically inclined, I don't completely understand it. my question is probably going to sound dumb to many of you, but here goes...on the volume 1 control (single coil), he shows a neg. coming from the pot and it is labeled "Bridge ground. Where does that ground go to? Thanks for the help. What a great site!
You need to be a member of Cigar Box Nation to add comments!
Comments
something like this if you dont have a metal bridge
"bridge ground" usually goes to the bridge if you have a metal bridge . if not .. you can add a strip of metal or brass to the string anchors and ground it like that to ground your strings .
hang on . ill get a picture