I built a CBG with a 25.5 scale, piezo pickup, brass nut and fret bridge, it sounds great but how do i reduce the sound of the box vibration. I guess thats what you would call it. The piezo is mounted under the bridge with a volume control. Am using a digital delay with my Rouge battery powered amp. Does any one have any suggestions to the problem. thanks
Can not have anything loose.... The piezo must be even and solid against the box/mount. I use hot melt glue to achieve that. The saddle needs to be higher than the where the strings come off the tail piece~ need down pressure on the saddle. The strings should not move on the saddle when you strum. They should be only half or less sunk into the saddle.
Comments
thanks Uncle john for the feed, I believe what I am trying to describe to my problem would be the accoustic sound when
tapping on the guitar body since it is hollow. Would a wound pickup instead of a piezo omit this problem.
Can not have anything loose.... The piezo must be even and solid against the box/mount. I use hot melt glue to achieve that. The saddle needs to be higher than the where the strings come off the tail piece~ need down pressure on the saddle. The strings should not move on the saddle when you strum. They should be only half or less sunk into the saddle.
Photos