Ok, so I have a pedal for looping.
It only has one 1/4" input jack (same as my amp). I'd like to be able to plug various instruments (cbg, stomp box) into one box and have one output to the pedal/amp.
Would this be as easy as just wiring +/- of s
Read more…Ok, so I built my first CBB, now I want a portable amp.
==Disclaimer: I have no idea what I'm doing!!! So any and all advice is greatly appreciated==
I found a good box at the Cigar Shop recently: 16"x7x5
Thinking of mounting the speakers in the b
Read more…First: sorry about the image quality.
I need to ground my jack to my bridge so I went and got a solder gun and wire.
In the pic below I have there is the white wire (I assume lead) that comes from the center of the black wire. It is soldered to a
Read more…Long story skip below if impatient ;)
I've got a production run going to cut costs and hopefully make better gits.
Hardwood is getting hard to source, especially small pieces. So I visited the one place in town that has it in stock.
Unfortunately
Read more…So the first couple g's I have made I used poplar I got from Home Depot.
That worked fine but now I have basically cleaned up the 3 straight pieces they have left. Sutherland's nearby also has some 1x2 (poplar and red maple) but I couldn't find a g
Read more…OK, so I'm finishing up my 2nd CBG and it's time to move on to a bass.
I've got a great Box and some strings (electric). I'm doing a 2 string.
But I need to figure out pickups (and tuners).
I'm looking at this:
http://www.cbgitty.com/cigar-box-gui
Read more…