John V. Pflaum's Discussions

John V. Pflaum's Discussions (4)

Sort by

SECOND BUILD TENOR UKE - THE EDUCATION CONTINUES.

Finally finished. There is no such thing as a cheep cigar box. The newer ones are made with plywood and do not offer a good sound board. This box had both the top and bottom sliced off and replaced with Western Red Cedar, for the top, and 1/4" birch

Started by John V. Pflaum

FIRST BUILD TENOR UKE - DONE! NICE EDUCATIONAL PROJECT.

Mark, attached are photos of the ukulele I had started before the holidays. The biggest mistake I had made was the placement of the bridge. Some how - and I still do not know why - it was off about 1/4 inch to the left. To correct the problem I moved

Started by John V. Pflaum

FIRST BUILD TENOR UKE - DONE! NICE EDUCATIONAL PROJECT. HAVE A QUESTION FOR THE NEXT ONE.

Attached are photos of the ukulele I had started before the holidays. The biggest mistake I had made was the placement of the bridge. Some how - and I still do not know why - it was off about 1/4 inch to the left. To correct the problem I moved the s

Started by John V. Pflaum

FRETBOARD - CAN YOU LAMINATE 2 BLOCKS OF WOOD TOGETHER ?

First time buildew with a question.

I have several sticks of purpleheart wood 1" x 1" x 35". I would like to know if you can glue 2 sticks together to get a 1 X 2 X 35 then slice a 1/4" slab off to make the fretboard?

I have found several discussions

Started by John V. Pflaum

#xg { position:relative;top:120px; } #xn_bar { top:120px; }

Hello, you need to enable JavaScript to use Cigar Box Nation.

Please check your browser settings or contact your system administrator.

SECOND BUILD TENOR UKE - THE EDUCATION CONTINUES.

FIRST BUILD TENOR UKE - DONE! NICE EDUCATIONAL PROJECT.

FIRST BUILD TENOR UKE - DONE! NICE EDUCATIONAL PROJECT. HAVE A QUESTION FOR THE NEXT ONE.

FRETBOARD - CAN YOU LAMINATE 2 BLOCKS OF WOOD TOGETHER ?

Note: this page contains paid content.