Forums

Question about cables

Posted by Dustin Aurand on May 13, 2017 at 2:00pm in Cool gear discussion - that's not cigar box relate
I have a piezo and bass pickup in my guitar, as the one in this video. https://youtu.be/jjC2C5h0HjU I also have a percussion device/acoustic pickup running parallel to the piezo, as seen in this video. https://youtu.be/aLL83bseXUc Do they make a cable with 2 guitar inputs on it? My plan is to get an octaver and looper and run them into just one pedalboard. I'd like to use the looper to lay down percussion, bass lines, and riffs, and play over those.

IMG_1614.JPG

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Email me when people reply –
Follow

Replies

  • Clark Rowden May 13, 2017 at 5:38pm

    I don't know of any cables that have two 1/4" mono plugs molded together, maybe they do make them, but I have never seen one.

    If it were me, I would use a single 1/4" stereo jack on the CBG with one signal from each source going to the tip and the ring with the ground hooked to the sleeve and then use 1/4" TRS cable like...

    this 6' cable: https://www.monoprice.com/product?p_id=9441

    or this 15' cable: https://www.monoprice.com/product?p_id=9443

    Then make a 'breakout box' on the pedalboard with one 1/4" stereo jack and two 1/4" mono jacks to route the two signals however you wish.

This reply was deleted.