The black paint on this box scratches very easily. (I have been hiding scratches with a permanent marker.)

Should I spray some kind of clear coat on to protect it? If so, which is best for this?

Views: 675

Reply to This

Replies to This Discussion

To be clear , the wear in the photo above is not "natural " . just made to look that way ./( sand paper ,  and  instant coffee stain in appropriate areas )   ;-)

Right, it looks like unintentional ware, that’s the art

I would use spray lacquer. It dries in an hour so you can add As many Coats as you Want to get the finish that you want.
I use Modge-Podge. You'd be surprised how useful that stuff is for protecting box art. No problems with tone. Cheap, easy, and easy clean up.

I do a lot of artwork for a Nature Centre. One thing I do use is the clear coat exterior Varithane to coat projects. The SPRAY version which is also water based. This can seal the paint and the box.  Since you used a marker, I would not use anything with a thinner base in it that is for oils or laquers etc.  Water based products will not run the paint or the pen marks.  Always test something similar that you don't want to use or is scrap.  I have found this process to work very well!  I have even made play cameras with paints and insulation foams, and finished coated with this method.  The new exterior products are plastics, and they hold up much better than they used to do! If kid proof, it should also be instrument proof. I have also built , carved and created many different instruments, and used the spray methods for some of the finishes.  On wood boxes, don't forget to try out the old fashioned gun stock oil! That simply is the best oil out there and instruments can have anything from soft satin to high polish look when using gun stock oil. Hope this helps:) Cheers!

I sprayed some water-based Varathane on this box. Worked pretty well. I’m sure it will eventually get some natural wear, assuming the guitar ends up being a good one...it will just take a little more time.

I used clear Rust-Oleum on this one.

During the build I put blue tape on the areas I’ll be cutting and mask the rest of the box with some heavy weight paper to protect it. For finish I use Minwax fast drying Polyurethane on most of my cigar boxes. It goes well over everything. Spray the first coat light, then recoat within an hour and walk away.  Hit it lightly with 320 the next day and spray a third coat nice and thick then walk away. Let it cure for a couple days and repeat the process. 

That does work great. But, if you can only spray a couple of times, you can also brush on the rest of the coats. Gives it an artists look too as well as going on a bit thicker, but be careful not to create runs.  . Also,  you can also use gun stock oil to do the instruments:) That is an original finish for many instruments even today. I have had much success with using that process too:)  However with cardboard projects, not wood, the poly does tend to allow for more flex. Just my experiances...:)

Cheers!:) 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans yesterday. 8 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. liked Gary O'slide's video
29 minutes ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

"Thanks. Wow! That becomes a spendy box Alan. They are pretty distinctive though. I have a few on…"
4 hours ago
Nigel McTrustry posted a video

Nigel McTrustry & The Hound Dogs are Loose! - Yellow Dog - Live - Original - Cigar Box Guitar

Nigel McTrustry & The Hound Dogs are Loose! Yellow Dog (McTrustry)@ The Cave Inn Brisbane, Australia.The song is currently on Spotify.
4 hours ago
AGP # commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

""Sweet Doug" :-), have seen quite a few Flathead Builds over the years, great looking…"
7 hours ago
AGP # liked David Dodt's photo
7 hours ago
AGP # liked David Dodt's photo
7 hours ago
AGP # liked David Dodt's photo
7 hours ago
AGP # liked Doug Thorsvik's photo
7 hours ago
AGP # liked Doug Thorsvik's photo
7 hours ago
AGP # liked Doug Thorsvik's photo
7 hours ago
AGP # liked Aaron Green's photo
7 hours ago
Keith Rearick liked Gary O'slide's video
8 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->