Can someone help me with a diagram or good description on how to place a rod piezio pickup under the bone?  Does the bone go directly on the pickup or is the pickup in a channel under the saddle?

Also  how does one wire an 1/8 inch plug onto the 1/4 inch jack?  is there a simple wiring diagram available anywhere?

Thanks,

Steve

Views: 195

Reply to This

Replies to This Discussion

When i do my rod bridges, i cut a slot that goes all the way through the bridge base, it`s the same width as the rod about 1/8". The rod sits down in the slot, the bone saddle sits on top of the rod. The rods work from pressure on them from the strings on the saddle. Then i add a piece of veneer to the bottom of the bridge base and drill a small hole for the rod wire to go through. I cut off the 1/8" plug on the wire, fish the hot wire [ plastic coated ] out of the braided wire [ ground ] and solder them up to a regular input jack. Tip ; if you need to cut the rod shorter, cut it on the side, not down from the top. Also test it to make sure it`s working properly before you install it in the bridge base. I do this by having the rod wire set up for soldering, have a jig with 2 alligator clips soldered on a input jack. Clip the wires on the jig and plug the rod in, tap on the rod to see if it`s working correctly. If you look at the pic`s on my page you can see some of the other custom rod bridges i`ve made.

Randy S. Bretz, when you said "cut on the side, not the top". Are there markings like on a diode or physical characteristic such as a flat spot on a 'LED'? I've never seen one up close, but plan on using them. Also what is the shortest usable length without killing performance?

Kool dog, there’s an article on cutting rod piezos in the cigarboxguitar.com archives? If you scroll down towards the bottom of this page, there’s a link box to the archives? Cheers  :)

Thanks.

Sweet!  Thanks.

Steve

just to build on what Randy said I have found that the closer you get the rod to the strings the better the volume. Especially if you are not using a preamp. So I build some of my bridges with a spacer under rod to bring the rod up a little closer(bone or other bridge material is a bit shorter to bring it closer ) to the string

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Equalizer preamp

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Will "KOOL DOG HOOCH" Bonner 2 hours ago. 9 Replies

Piezo disc under fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans 8 hours ago. 12 Replies

Yamaha yg15 schematic needed

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig yesterday. 27 Replies

Pan for a resonator

Started by Will "KOOL DOG HOOCH" Bonner in Other stuff - off topic, fun stuff, whatever. Last reply by Paul Craig on Friday. 8 Replies

Placing piezio rod

Started by Steve Eckel in Performances, How to Play, Lessons, Concerts. Last reply by Will "KOOL DOG HOOCH" Bonner on Thursday. 7 Replies

Single-layer boxes?

Started by Sean Murphy in Building Secrets, Tips, Advice, Discussion. Last reply by Tim Pannabecker on Thursday. 6 Replies

Trivia Quiz

Started by Tim Pannabecker in Building Secrets, Tips, Advice, Discussion. Last reply by the anonymous pick on Wednesday. 9 Replies

Decal top removal

Started by Robert Bryan in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner May 13. 3 Replies

Blog Posts

Latest build

Posted by Sean Murphy on May 8, 2019 at 9:03pm 4 Comments

Netherlands Tour

Posted by Dar Stellabotta on May 8, 2019 at 5:33pm 0 Comments

Sunday canjo fun

Posted by Sean Murphy on April 21, 2019 at 5:26pm 2 Comments

Latest Activity

Richard Sundberg commented on Richard Sundberg's video
2 hours ago
Richard Sundberg commented on Richard Sundberg's video
Thumbnail

1970 Olds F85 Daydreamin. Derek Rose & Richard Sundberg

"The Olds Cutless was a warhorse! That’s great mileage for a 2003 GPT Nancy! Never owned one,…"
2 hours ago
Will "KOOL DOG HOOCH" Bonner replied to Will "KOOL DOG HOOCH" Bonner's discussion Equalizer preamp
"It turns out I was concerned about nothing! I he pre-amp won't come I to contact with the…"
2 hours ago
Lonman replied to Paul Craig's discussion What's on your workbench?
"thanks. yea, I got some ideas spinning in my head, should be interesting"
3 hours ago
the anonymous pick commented on Chris Lyons's photo
Thumbnail

Padron NightHawk

"mighty fine"
3 hours ago
Casey Baron commented on Casey Baron's video
3 hours ago
AGP # liked High Bird Handcrafted Instuments's photo
4 hours ago
AGP # commented on Dave Lynas's video
Thumbnail

Slight of Hand

"I'm with Unc, but I see 2 demented genius's :-D :-D"
4 hours ago
Derek Rose commented on Richard Sundberg's video
Thumbnail

1970 Olds F85 Daydreamin. Derek Rose & Richard Sundberg

"Thanks guys and Richard especially for letting me play along :-)"
4 hours ago
Derek Rose commented on Richard Sundberg's video
4 hours ago
AGP # liked Dave Lynas's video
4 hours ago
AGP # liked Andries D. EKER's video
4 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->