Replies to This Discussion

Permalink Reply by Henry Strat-o-varius Lowman on September 18, 2011 at 5:02pm

Check out C. B. Gitty's site. He's got pick ups and more!

 

• ▶ Reply

Permalink Reply by Robert DiPietro on September 18, 2011 at 5:26pm

I know, but, I got a rather small build goin on, and I need just a single string pickup...thanks though.

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on September 18, 2011 at 6:20pm

Robert,

 

You could always take a cheap standard 6-string mag pup, and run it "vertically" in a line along the string, a la Jack White's "It Might Get Loud" diddley bow...assuming you have enough room on your sound board.

 

Or look at the Harrison 3-pole pickups from the UK over to the right -->.

 

Or contact Ted Crocker (a CBN Member), and see if he has any single pole pups for sale or make.

 

Or get hold of 1/2 of a Fender P-bass pup set up, and run it vertically, that's only 2 poles...

 

Oily

 

 

• ▶ Reply

Permalink Reply by the anonymous pick on September 18, 2011 at 6:42pm

check these thin babys out
http://www.klangbox.at/index.php?option=com_content&view=articl...

• ▶ Reply

Permalink Reply by Robert DiPietro on September 18, 2011 at 7:12pm

hey oily, thanks, I would normally just run a regular six string vertically, but like I said the body on this thing is really small, it would even fit. and, anonymous pick... OH YEAH, THOSE :) .. thanks

• ▶ Reply

Permalink Reply by the anonymous pick on September 18, 2011 at 7:33pm

rob,, a member her  makes those ,  that is  his site ,,  super thin things too  eh ;-) .   anyway , he's a good guy   here's his  page if you want to ask him about them . http://www.cigarboxnation.com/profile/ElmarZeilhofer

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on September 18, 2011 at 7:44pm

Robert,

 

Ted Crocker has a Stonehenge 1 single pole picklup for CBG for $26.95:

 

http://tedcrocker.com/stonehenge.html

 

Oily

• ▶ Reply

Permalink Reply by Outhouse Instruments on September 18, 2011 at 8:27pm

Here's an option.

 

http://www.syncobass.com/

 

 

AFKAM

• ▶ Reply

Permalink Reply by Elmar Zeilhofer on September 19, 2011 at 8:08am

;-) ...small enough?

• ▶ Reply

Permalink Reply by Ron "Oily" Sprague on September 19, 2011 at 9:21am

Elmar shoots, he SCORES!

• ▶ Reply

Permalink Reply by Robert DiPietro on September 19, 2011 at 12:32pm

thanks for the suggestions everyone, those stonehenge ones might be a little thick, but i'll keep them in mind, also the synco looks pretty sweet and I'll keep that in mind too, but I think on this one I will have to go with the flat pickup.

• ▶ Reply

Permalink Reply by Robert DiPietro on September 19, 2011 at 12:53pm

Elmar, about your pickup... im putting it on a solid body, do you think ill need to do any routing, or is that totally flat?

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page