Replies to This Discussion

Permalink Reply by John Sawyer on October 21, 2015 at 6:24pm

I love those boxes... Use as-is!

• ▶ Reply

Permalink Reply by jeffrey ross on October 23, 2015 at 12:37pm

Dont change a thing. One of the best parts of this box is you really dont need to cut a sound hole in the top. The slot lets sound escape and the sound  is great.

• ▶ Reply

Permalink Reply by Bob Clark on October 24, 2015 at 2:57pm

Cool Box use as is no need to seal it up

• ▶ Reply

Permalink Reply by Jim Saraceno on October 25, 2015 at 3:35am

I assume that is not a slot that you could cut a filler piece for. Would it be possible to glue a thin piece of wood to the inside of the box that would close the void when the box is closed?

But I also agree with the other two posts about leaving it as is.

• ▶ Reply

Permalink Reply by Bluesheart on October 28, 2015 at 8:48am

I have closed that on one by soaking twine in wood glue and pushing it into the gap. OR just leave it.

• ▶ Reply

Permalink Reply by Robert Killen on October 29, 2015 at 2:56pm

I just lucked into one of these. Boy it's beautiful! Thanks for the question. I probably would have asked the same thing.

I'd love to see your build when you're done. Cheers!

• ▶ Reply