Does anyone know how high the nobs and slide switches protrude on the preamp from the mounting surface?

Views: 133

Reply to This

Replies to This Discussion

Hi Will, that could depend on the many different types out there. Some are flush level with the guitar side, some sit on top of the guitar side. All the ones I just checked are 5mm off the face of the preamp for sliders and 7-8mm high for knobs. Most were under 10mm high off the guitar side, but varied.

some preamps sit on top of timber some are recessed.

Hope that makes sense Taff

Thanks Taff, I was referring to the one CB GITTY sells.

I thought you was talking general. Best ask him then.

I don’t know how high in inches, but it can’t stick out more than any other preamp? Maybe there’s measurements of the specs on the site?

Thanks, I was just hoping someone had one installed for a quick answer? Most specs give overall dimensions. Not a big deal. Thanks

You'll also have to think about the surface being curved instead of flat since they were made for the side of a acoustic guitar.

There are some flat ones, but don't know if Gitty sells those yet.

Gitty's mention that there was a slight curve, but with two extra screws and a foam shim it would work. I ordered two flat ones that are coming on a "slow boat from China"! Hopefully they work! Thanks.

Nick over at CB GITTY was gracious enough to measure off one for me, so now I can figure out if my idea will work. Thanks everyone!

It turns out I was concerned about nothing! The pre-amp won't come into contact with the neck. The box is deep enough that the pre-amp will go underneath the neck. I was worried about having to notch the neck on the side

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building BasicsCigar Box Guitar Parts Store

Site Sponsor

Recommended Links & Resources

Forum

Frets and fretboard

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion yesterday. 0 Replies

Fret Sides Dressing

Started by Brent Kasl in Building Secrets, Tips, Advice, Discussion. Last reply by Fantacone Box Works yesterday. 6 Replies

Navigating this forum

Started by Fantacone Box Works in Performances, How to Play, Lessons, Concerts. Last reply by Fantacone Box Works yesterday. 5 Replies

30.5" scale lay-out help needed please!

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Will "KOOL DOG HOOCH" Bonner Jul 6. 15 Replies

Free Cigar Box Tablature Library

Started by Ben "C. B. Gitty" Baker in Performances, How to Play, Lessons, Concerts. Last reply by Brad Schoonmaker Jul 4. 12 Replies

Nut and #1 fret spacing.

Started by Will "KOOL DOG HOOCH" Bonner in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Jul 2. 11 Replies

Blog Posts

apology

Posted by Danny Gordon on July 13, 2019 at 7:30pm 3 Comments

Latest build

Posted by Sean Murphy on July 5, 2019 at 8:34am 5 Comments

A Tale of Two Ukes

Posted by Poorness Studios on June 25, 2019 at 10:00am 2 Comments

Latest Activity

Randy S. Bretz liked Dave Lynas's video
55 minutes ago
Randy S. Bretz liked Dave Lynas's video
55 minutes ago
Fantacone Box Works posted a photo
1 hour ago
Allan jay Palermo posted photos
1 hour ago
Glenn Kaiser posted a photo

gkDoubleDiddleyBow

Double Diddley, bass string on one neck, plain heavy git string on the other
1 hour ago
Blues Frog commented on Smokin' Guitars's photo
Thumbnail

Dog Bone 1

"I like this one alot! Very cool build."
1 hour ago
Blues Frog replied to Smokin' Guitars's discussion Smokin' Guitars - New Member Introduction in the group Introduce Yourself!
"Started building in 2015 for something new to do. Joined this site because the folks here are…"
1 hour ago
Uncle John posted a photo
1 hour ago
Taffy Evans replied to Paul Craig's discussion What's on your workbench?
"Hi Mark, the patches are spruce and glued with the grain going across the seam for strength. Yep,…"
1 hour ago
Uncle John posted a video
2 hours ago
Larry Cuddy posted photos
3 hours ago
Larry Cuddy updated their profile
3 hours ago

Music

Loading…

© 2019   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->