http://www.harborfreight.com/1-2-half-ton-arbor-press-3551.html

has anyone come up with a way to modify a cheap arbor press like this one ?

I need it to accept punch pins but don't have time to drill out the ram and I will probably use this once and would rather not spend the money on a more expensive press.

thanks in advance,

Kirby

You need to be a member of Cigar Box Nation to add comments!

Join Cigar Box Nation

Email me when people reply –

Replies

  • Mount the pin in a block of hard wood and place it on the work plate and press the object to be punched down from the top.

This reply was deleted.