Howdy... I saw a video on line about sealing a piezo in wood and cannot find it again. has anybody else seen this or maybe knows how to do it. i figure its easy but before i try it i like some feed back. Thanks for any info possible..... Dave
You need to be a member of Cigar Box Nation to add comments!
Thanks Michael.. Last nite i went thru all my files and actually found what i was looking for. It was from a tutorial i got off this site on building a cbg.... DUH... Thanks again.... Dave
MichaelS said:
David, sandwiching is simple. Just hollow out one half so it covers the piezo, make sure the flat side is up towards the strings and leave space for the wires to come out. I do this on mine and it works great.
David Davies said:
Thats close David but not quite the one im looking for. It was a single piezo sandwiched between 2 pieces of wood. I have plenty of piezos I gues ill just try what i think will work and see what happens. ill keep you updated... thanks again..... Dave
David Lloyd said:
Hi David,
There is a tutorial here (by Jef Long) that I found earlier today which is excellent.
David, sandwiching is simple. Just hollow out one half so it covers the piezo, make sure the flat side is up towards the strings and leave space for the wires to come out. I do this on mine and it works great.
David Davies said:
Thats close David but not quite the one im looking for. It was a single piezo sandwiched between 2 pieces of wood. I have plenty of piezos I gues ill just try what i think will work and see what happens. ill keep you updated... thanks again..... Dave
David Lloyd said:
Hi David,
There is a tutorial here (by Jef Long) that I found earlier today which is excellent.
Thats close David but not quite the one im looking for. It was a single piezo sandwiched between 2 pieces of wood. I have plenty of piezos I gues ill just try what i think will work and see what happens. ill keep you updated... thanks again..... Dave
David Lloyd said:
Hi David,
There is a tutorial here (by Jef Long) that I found earlier today which is excellent.
Replies
MichaelS said:
David Davies said:
David Lloyd said:
John Maw said:
Hi there David.
Was it this - Cigar box guitar bridge kit?
All the best.
John
Hi David,
There is a tutorial here (by Jef Long) that I found earlier today which is excellent.
http://www.cigarboxnation.com/profiles/blogs/an-archtop-piezo-bridg...
There is also an old discussion here about it http://www.cigarboxnation.com/group/superclass/forum/topics/buildin...
Regards,
David