Comment

Comment by Jim Morris on November 18, 2015 at 3:21pm

If your tile saw has a 1/2" arbor it should work. I bought the Harbor Freight mini saw for less than $50 since all my others are 5/8"

Comment by doggylv . on November 18, 2015 at 11:59am

Wayfinder, looks like the eBay store I listed in my video has sold out, still don't know where Del got his. You can do some searching on eBay, the blades are jeweler slotting/slitting blades.

Comment by Jim Morris on November 18, 2015 at 11:51am

http://www.ebay.com/itm/HSS-Jewelers-Saw-3-D-x-023-W-x-1-2-Hole-X-2...

See if this works.

Comment by Jim Morris on November 18, 2015 at 11:41am

Hmm... Wayfinder. I think I went on ebay and searched .023 kerf circular saw blade and found it that way. Hope that helps. I'll send more info if I find it.

Comment by Jim Morris on November 18, 2015 at 4:41am

http://www.ebay.com/usr/toolmexonlineoutlet

Hey WayfinderI got this from dogglyv's drill driven jig video.

Comment by Jim Morris on November 18, 2015 at 2:30am

OK! I got the blade and the saw now I just have to make the sliding jig. Maybe by this weekend. Thanks again for the demo.

Comment by Ray K III on November 15, 2015 at 12:10am

Nice video. I had bought one of those HF mini table saws, and it did bog down on me. So I couldn't do slots in harder woods like oak or cherry. Pine it was ok. but its softer wood, but I'm not using pine for a cbg. Kinda wish you didn't speed up showing you cut them, cause I wanted to hear it run for you. I ended up returning the saw since I ended up damaging a lot of cuts. Same blade as well from ebay was used. When they come out with a version that has torque to not bog, then I'll go back an get it.

Comment by doggylv . on November 13, 2015 at 9:56am

Brian, thanks for the info, I will have to check this out

Comment by Brian Revels on November 13, 2015 at 7:03am

Hey doggylv, on your iPad you can look at installing an Internet Browser called, "Puffin".  Here is an article on it that does a decent job of summing it up: Puffin Article Link. It's about the only way I am aware of that you can view Flash Player content on an Apple device.

Man... you never know what you'll learn about on Cigar Box Nation... that's a fact! :-)

Comment by doggylv . on November 13, 2015 at 1:40am

Hey Del, good video... I thought about doing this but in looking at other videos about this little saw, most said it bogs down and that the blade wobbles somewhat, do you find this to be true?

Barry want to know where you got the blade.

And I still can't see this on my IPad, Apple doesn't use Flash Player Wayfinder, any other ideas?

Jim, if you have had rotator cuff surgery like I have you might look at different ways to do a lot of things. 

• ‹ Previous
• 1
• 2
• Next ›
• Page