Hi all,

Doing my first angled headstock. The scarf cut was not perfect and the joint seam on the back of the neck is a little ratty looking. It’s not a smooth transition in to the neck. Any of have experience with cleaning up or hiding the seam? Or do I just sand the heck out of it? 

Mike

Views: 111

Replies to This Discussion

I would sand the rough parts flat until they match up? Are they glued together already? Pics? A good clamping, sharp blade & practice will help in long run? Don’t worry, it’s your 1st, next one’s gonna be better? BTW, I practiced on scrap before I actually did one for keeps? good luck :) https://www.youtube.com/watch?v=-5024VR40fg&list=PLQoYJG1ht92f3...

Sand it smooth and move on. As long as you have a good glue joint it's only aesthetic. You can always paint the headstock a solid color to mask the misalignment of the woodgrain if that's the main concern. They're never perfect.

One trick to sanding a a scarf joint is to use a sanding block, instead of sanding back and forth you sand in a circle. Back and forth you have double pressure in the ends and there is always a gap. In a circle it remains flat. Can't wait to see your #1! 

Forgot to add, the paper bands wrapped around cigars are great for covering up boo boos?

Thanks to all who responded to my question. My problem is with the feathered edge on the back of the neck. I ended up taking a small file and working it until it looked better. Not perfect but I’ve decided it’s just a character addition and likely no one will notice except me. Still working on getting over my “perfectionist “ problem when building. This is my sixth build and not one has been perfect and not one person has commented on it! 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Sep 20, 2023. 7 Replies

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

BrianQ. liked Gary O'slide's video
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

"Thanks. Wow! That becomes a spendy box Alan. They are pretty distinctive though. I have a few on…"
7 hours ago
Nigel McTrustry posted a video

Nigel McTrustry & The Hound Dogs are Loose! - Yellow Dog - Live - Original - Cigar Box Guitar

Nigel McTrustry & The Hound Dogs are Loose! Yellow Dog (McTrustry)@ The Cave Inn Brisbane, Australia.The song is currently on Spotify.
7 hours ago
AGP # commented on Doug Thorsvik's photo
Thumbnail

Flathead Diddley Bow

""Sweet Doug" :-), have seen quite a few Flathead Builds over the years, great looking…"
9 hours ago
AGP # liked David Dodt's photo
9 hours ago
AGP # liked David Dodt's photo
9 hours ago
AGP # liked David Dodt's photo
9 hours ago
AGP # liked Doug Thorsvik's photo
9 hours ago
AGP # liked Doug Thorsvik's photo
9 hours ago
AGP # liked Doug Thorsvik's photo
9 hours ago
AGP # liked Aaron Green's photo
9 hours ago
Keith Rearick liked Gary O'slide's video
10 hours ago

Events

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->