See any problems using a single eyelet screw to route two strings off head prior to nut for guidance?

Views: 229

Reply to This

Replies to This Discussion

Hi Brent, I would want to keep the strings apart so that they don't cross over each other and cause tuning problems. I would file two grooves in the post to keep them separated. No sharp edges.

Taff

If you're wanting to use the eye screw for the homemade look that's cool, but if you are looking for functionality you could use an actual string tree which is made to guide two strings.

https://www.strat-central.com/70sstrats/70s_files/016.jpg

Pretty sure tuning the heavier string would pull the other string outta whack.  especially if  the strings  are angled off  at that point  . 

Hi, I think string trees are better at putting a break  angle behind the nut than redirecting strings, but I think they will do both.

Taff

Taff .  if your  reply  was meant  for me (as it is  under my post replys.)   My post was  about the original  posters  use of an eyelet . 

Hi Pick, no just some general info for Brent.

Taff

Cool. in the futrure , when replying to the original poster,  it's best to use the original comment box up-top, . Using the reply button under anyone's post  usually means that  comment is personally  to them, or the line of thread  from their first personal reply.

I know , it can be confusing at times . i've done it myself a few times . hence the clarification check. ;-)

carry on. ;-) 

I hear what you are saying pick but don't understand it really. Either way the post ends up at the end of the list of posts, doesn't it? That's what I've noticed with mine anyway. Like this one, unless someone gets in just before me.

Taff

It will end up on the  end of the list of posts only if  you you reply to the last post  on the page . if you were to reply to someone else mid page . it would break in  and post under theirs .

Also , personal reply's create a step margin (as in screen shot below) indicating to them (and everyone else) your post  was directed at them , and depending  if your content matches  or not,  if may seem  like you are directly contradicting them ,  agreeing with them , attempting to correct them , or support them. or  directing a question to them relating to their post. or to them personally.

hope that helps .

Hey Brent another way to keep the strings separated could be to put one string through the eye and another under it.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Bernie Edwards commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"The cherries make it really even more special!  Great project with a unique and special result!"
3 hours ago
Crazed Fandango replied to Rich Butters's discussion UK - Best Place to Buy Cigar Box's
4 hours ago
Crazed Fandango commented on David Woodman 's photo
Thumbnail

IMG_0749

"Amazing!"
4 hours ago
Crazed Fandango liked David Woodman 's photo
4 hours ago
Crazed Fandango posted a photo
4 hours ago
Rich Butters posted a discussion

UK - Best Place to Buy Cigar Box's

Hi all, I am living in Thailand and building CBGs for about a year.  I will be returning to the UK…See More
6 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Im assuming the wood is cherry?"
9 hours ago
Rob (Uker) Porras commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"Wow wee!!! That is gorgeous!! "
9 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks kale !yup that shaker sure keeps the groove going , and this LACE is my fender in the CBG…"
13 hours ago
AGP # liked Ghostbuttons's photo
14 hours ago
AGP # commented on Randy S. Bretz's photo
Thumbnail

Off the Bench !

"A while in the making, But!, well worth the wait, another outstanding one off Randy Bretz Build,…"
14 hours ago
AGP # liked Randy S. Bretz's photo
14 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->