I am working on my first build.  

It is a 3-stringer with an oak (not quartersawn) neck and a walnut fretboard.  

I like having quite narrow string spacing and wanted to replicate the string spacing I had on a couple of other guitars that I play.  Measuring up at the neck it looks like 25mm would fit the string spacing and give a bit to spare either side of the top and bottom strings.  Then I would taper it out to 35mm at edge of the box.  

Is this too narrow?  Am I removing too much wood from a neck strength point of view? Is it going to feel like I am playing a pencil instead of a guitar?

Please, could you let me know your recommendations? 

Views: 483

Replies to This Discussion

1 1/2 inches is the standard three string neck width and corresponds to a standard lumber board width.  Any narrower and you increase the probability of the string tension bending the neck.   you would need a truss rod to counteract this.   IMHO, a narrower neck would also not be comfortable to play.  It would be like playing a dowel rod or broom handle.  The string spacing on a three string is also easier to play slide on than a six string spacing as it is more forgiving.  I've been beating on guitars and basses for many years and it wasvery easy to transfer to the 1 1/2 inch neck and string spacing.

Thanks Chuck.  Finding hardwood seems to be a bit trickier in the UK.  I am making this guitar from a bannister. 

For timber in the UK try Feuillus Fencing,sapele,oak,lime,walnut,wenge etc.For fingerboards try your local model shop for 900 lengths of 6mm hardwood or on line SLEC.Or get to know a local builder,they are pulling out hardwood conservatories and doors,replacing them with plastic! Here's a photo of some of my collection from that source.The guitar neck is wenge from Feuillus,beware of the spelks! 

P.S.Feuillus also sell replacement laths for garden seats that are about the right size for a neck

Great advice - thank you!  I love the idea of the reclaimed hardwood too.  Really good value from Feuillus - that Wenge neck looks great. 

This tenor four string is 1 1/8" at the nut and 1 3/8" at the body.being a four string it does have steel in the neck.

Thanks - that looks like a lovely guitar. I think I am going to go for something in between your two recommendations.  I really appreciate the help.  I think I will put some steel in my next one to give me a bit more flexibility. 

Michael, 

Can I just ask a follow-on question here, please?  Did you also taper the thickness of the neck up to the fretboard as well? If so how thick is the neck at the nut/heel (as opposed to the width which you have given here?)

The neck is 5/8"thick at the nut and 7/8" at the heel.The finger board and spacers add about 3/8" to that. 

Hollowbelly's old red Christian Beshore 3 stringer has a very skinny neck, about 25mm wide at the nut. He's had it years and thrashed it mercilessly on many European tours - I've recently  had it in my workshop to replace the nut and it's still in fine fettle. As long as you keep a decent amount of depth in the neck you can get a very narrow neck to work. I've tapered a few necks from my usual 35mm width and rather like the feel of them.

Thanks John.  Thanks also for organising Boxstock.  My wife and I had a great time at the day event and learnt loads.  Thanks also for the supplies - most of the hardware on the guitar (to be) I got from you.  What thickness do you normally make your necks at nut and heel? 

Typically I start with a 22mm neck blank with a 6mm fretboard glued on, and usually they are are a constant depth  from nut to heel.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
15 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
15 hours ago
Kent Thurston updated their profile
16 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
17 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
17 hours ago
Poorness Studios liked A.D.EKER's video
19 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
19 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
22 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->