Okay, so this isn't my first cigar box guitar, but I need some ideas for headstocks. I would like to make something simple but nice. It's a 3 string with Alaskan birch wood.

Views: 1283

Replies to This Discussion

fretted, frettless, slide, picked, scarf neck, not, slotted, padddle, fender style modern art..... where would you like to start?
how are you equipped for tools?

There's a few thousand pics in the photo file that should give you some great ideas.... After that, we can give you some more ideas... You're also welcome to roam around my photobucket account... over 1000 pics, mostly CBGs...

http://s275.photobucket.com/home/WichitaSam/index

get back to us and we'll help you with a killer headstock.

the best,

Wichita Sam
The last one was actually done for me by ron marr, "Blind Doughboy" in SW Missouri.... it's a scarf jointed oak neck with "wings" of canary and blood wood that is then bandsaw'd into an abstract pattern.... Not that hard to do once you're comfortable with working scarf joints and bandsaws.

I still have one that he build for me on the shelf... If you need design help, let me know....

sit down with a piece of paper and just start schetching....

the best,

Wichita Sam

Steven Downer said:
Probably a dumb question, but I'll ask it anyway: When the headstock is broader or thicker or slanted back from the neck, it has to be a separate piece of wood, right? And if so, it would have to have a truss rod or some such strengthening to prevent it from collapsing. Please correct me or clarify. Thank you.
Well, yes, mostly, sorta..... If you're building a headstock design that is wider than the neck, you generally just glue "wings" onto the side, and then cut out the shape you what. Assuming you use good wood glue, between smooth surfaces, that is more than strong enough to hold up to the strain of tuners.

In necks that angle away from the plane of the top of the neck there are two options. First, start with a thicker than necessary neck stock, cut away from the bottom of the neck for the actual "neck' part and angle cut the head stock portion. But... mostly, people doing angled headstocks are making "scarf" joints. These are secured with glue joints. and if done right are plenty strong.

search "scarf joint" and you should get a lot of info including pics.....

hope this helps,

the best,

Wichita Sam

ChiBob said:
Probably a dumb question, but I'll ask it anyway: When the headstock is broader or thicker or slanted back from the neck, it has to be a separate piece of wood, right? And if so, it would have to have a truss rod or some such strengthening to prevent it from collapsing. Please correct me or clarify. Thank you.
Thanks a lot, Sam! You have definitely upgraded my understanding of these things. So the" wings" will hold with appropriate glue. Like Gorilla glue? Or Elmer's Carpenter's? I'll definitely look up scarf joints; thanks again.

Wichita Sam said:
Well, yes, mostly, sorta..... If you're building a headstock design that is wider than the neck, you generally just glue "wings" onto the side, and then cut out the shape you what. Assuming you use good wood glue, between smooth surfaces, that is more than strong enough to hold up to the strain of tuners.

In necks that angle away from the plane of the top of the neck there are two options. First, start with a thicker than necessary neck stock, cut away from the bottom of the neck for the actual "neck' part and angle cut the head stock portion. But... mostly, people doing angled headstocks are making "scarf" joints. These are secured with glue joints. and if done right are plenty strong.

search "scarf joint" and you should get a lot of info including pics.....

hope this helps,

the best,

Wichita Sam

ChiBob said:
Probably a dumb question, but I'll ask it anyway: When the headstock is broader or thicker or slanted back from the neck, it has to be a separate piece of wood, right? And if so, it would have to have a truss rod or some such strengthening to prevent it from collapsing. Please correct me or clarify. Thank you.
ChiBob said:
So the" wings" will hold with appropriate glue. Like Gorilla glue? Or Elmer's Carpenter's? I'll definitely look up scarf joints; thanks again.

Use a PVA glue (Titebond is very popular over there in the US - Evo-Stik here in the UK), and clamped properly, your joint will generally be stronger than the wood itself. (Try breaking one apart and you'll see).

I wouldn't use Gorilla Glue as the glue expands while setting. Ok, this will fill tiny gaps but is a weak joint as the expanded glue contains entrapped air bubbles.
gorilla glue? gods above no! Gorilla glue is only good for furniture with sloppy joints... it expands as it dries. Any good wood glue, slightly contracts pulling the joint together. gorilla glue will push joints apart, misaligning them...

ChiBob said:
Thanks a lot, Sam! You have definitely upgraded my understanding of these things. So the" wings" will hold with appropriate glue. Like Gorilla glue? Or Elmer's Carpenter's? I'll definitely look up scarf joints; thanks again.

Wichita Sam said:
Well, yes, mostly, sorta..... If you're building a headstock design that is wider than the neck, you generally just glue "wings" onto the side, and then cut out the shape you what. Assuming you use good wood glue, between smooth surfaces, that is more than strong enough to hold up to the strain of tuners.

In necks that angle away from the plane of the top of the neck there are two options. First, start with a thicker than necessary neck stock, cut away from the bottom of the neck for the actual "neck' part and angle cut the head stock portion. But... mostly, people doing angled headstocks are making "scarf" joints. These are secured with glue joints. and if done right are plenty strong.

search "scarf joint" and you should get a lot of info including pics.....

hope this helps,

the best,

Wichita Sam

ChiBob said:
Probably a dumb question, but I'll ask it anyway: When the headstock is broader or thicker or slanted back from the neck, it has to be a separate piece of wood, right? And if so, it would have to have a truss rod or some such strengthening to prevent it from collapsing. Please correct me or clarify. Thank you.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
11 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
13 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
14 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
16 hours ago
A.D.EKER commented on Ricky D's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->