Replies to This Discussion

Permalink Reply by Arnold Kelly on August 28, 2012 at 12:42am

Yeah, that's pretty much how I've seen every mag p'up mounted on a D'Bo. Should work just fine. :)

Permalink Reply by Mike Huber on August 28, 2012 at 8:47am

Installed the pickup this afternoon. I had to cut a larger then usual access hole to wire it up since it the box already had been glued shut but that didn't effect the acoustic tone ( which is LOUD because of the large size of the box... It came out pretty darn nice and the electric tone is awesome!!..... Pic 1 after i mounted the pickup to the lid and fished the wires through AND NOW I CAN USE DISTORTION!!!! LOL!!! I 

Permalink Reply by Mike Huber on August 28, 2012 at 8:48am

Permalink Reply by Mike Huber on August 28, 2012 at 8:52am

Pic 2 (above) roughed-out access hole..Pic 3 (below) smoothed access hole

Permalink Reply by Mike Huber on August 28, 2012 at 8:58am

Permalink Reply by Mike Huber on August 28, 2012 at 8:59am

Finished view from the front

Permalink Reply by Mike Huber on August 28, 2012 at 9:01am

Finished view from the back

Permalink Reply by rusty case on September 2, 2012 at 8:36pm

Looks dandy!

I would like to hear an mpeg clip, too...

...trying to learn about recording....   what's the best way to make audio files and post them?   best = the EZ way  :-)

rc

Permalink Reply by Arnold Kelly on August 28, 2012 at 1:17pm

Looks great! Would love to hear how it sounds. :)