I use a hole punch and some veneer scraps. I also use the inside spike of pop rivets(after using those for string openings) for nice side dot markers.

I was also paging through an old grizzly catalogue with all these nice photos of rare woods -I bet you could cut some holes out of those too. While your add it make some fake veneer for your headstock!

Just apply with modge podge.

 

I've also heard people using:

guitar picks

credit cards (only good use for these!)

anyone try old cds yet?

 

Anything else we can use???

Views: 2486

Replies to This Discussion

I use plastic combs for nuts and bridges.

The teeth from the comb make excellent side dot markers.

BIll- do you drill and drive like placing a wooden peg?
I used brass screws.  Originally they were functional and held the fretboard on as well...but the neck started to warp so glued the fretboard (which put an instant stop to the warping) and the screws are just fret markers now.

That's a great idea. I was looking at plastic hangers and wood/metal pant hangers for similar parts.

 

Wade

Bill Jehle said:

I use plastic combs for nuts and bridges.

The teeth from the comb make excellent side dot markers.

I tried using a hole puncher on a cd. I didn't work. The foil part separates from the plastic. I think using guitar picks works best. They're cheap and come in countless colors and patterns.
have you tried using a paper punch on old credit cards ,you can get some nice colours.
Shawn has used sliced up (cross sections) plastic chop sticks and sliced up lead solder for dots.

I  use toothpicks and wooden meat skewers for side dot markers.

Someone also suggested  useing a pencil sharpener to sharpen a contrasting piece of wood then drill a hole in the side of the finger board and force the pointy bit in then cut it off.

i have used those little paper "donut" shaped things that you use for stregnthening paper in a file.  I stick them on and paint into the hole - when the paint is dry peel 'em off

Most often I just use a wood burner and don't worry too much about the shape or pattern. Most recently I used a flat, chisel tip and just made a # sign at each location, then a tiny round tip to mark the top side of the neck.

I use plastic chop sticks. Stick one in a drill and use sand paper to round them out and cut 1/16 slices using an exacto saw. Drill a hole and super glue them in and finally sand them flush to the fret board. Best part I use the left overs as saddles or nuts you can get a packet of them for cheap
P.S. If you leave them in old coffee for a few days they get an old bone look.
just wanted to share this little tip ! (no pun intended !! ) home depot has escutcheon pins made of brass size #18X3/4 " that are awesome for side markers. you get around 50 of them for a buck. just drill ur side marker holes nip the pins down to 1/4 inch put a spot of super glue in the hole and stick them in. I countersink the heads with a drill bit the same size and recess them or u can just let them stay raised so u can feel them in the dark. heres how it looks

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

The Effects of Coffee, in a good way, folks........

Started by BrianQ.. Last reply by Wilda Connell Aug 5, 2020. 7 Replies

Low Budget Sanding Tool

Started by BrianQ.. Last reply by Order99 Jun 9, 2020. 3 Replies

Nails for frets?

Started by Mike. Last reply by Alan Robinson Aug 1, 2017. 8 Replies

Flea market finds

Started by Mike Jul 24, 2017. 0 Replies

Not just a lolly stick

Started by Wade Jan 2, 2015. 0 Replies

Save that box screw up!

Started by Wade. Last reply by Thomas "Duck" Petry Dec 3, 2014. 2 Replies

CB string height gauge

Started by Wade. Last reply by Wade Jul 9, 2014. 2 Replies

Recycled stuff

Started by Keith 66 Jun 11, 2014. 0 Replies

Free recycled Piezo pickups

Started by Wade. Last reply by Rob Brighton Jul 2, 2013. 19 Replies

Joining Lumber

Started by Where's Uranus?. Last reply by Mark Lindsay Jun 4, 2013. 8 Replies

Fretboard radius

Started by Wade. Last reply by rusty case Feb 11, 2013. 1 Reply

Free grounding foil

Started by Wade Feb 10, 2013. 0 Replies

Free Fret dot markers

Started by Wade. Last reply by Mark Lindsay Feb 3, 2013. 23 Replies

Recycled tonewood

Started by rusty case. Last reply by rusty case Nov 21, 2012. 13 Replies

Low $ substitute for banjo face?

Started by rusty case. Last reply by rusty case Nov 18, 2012. 6 Replies

Cheapo strings

Started by Karl G. Siewert. Last reply by rusty case Aug 27, 2012. 4 Replies

Hand saw.

Started by Wade. Last reply by rusty case Aug 27, 2012. 2 Replies

Tennis, anyone?

Started by Order99. Last reply by Order99 Aug 17, 2012. 4 Replies

1/2 Priced Nuts and Saddles

Started by Claude. Last reply by Order99 Apr 8, 2012. 10 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
14 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
14 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
15 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
16 hours ago
Poorness Studios liked A.D.EKER's video
18 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
20 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->