Replies to This Discussion

Permalink Reply by Taffy Evans on March 27, 2021 at 10:34am

Hi, I think it would make a noticeable difference in the acoustic box.

. As these styles of bridges are designed for solid-body electric guitars you will mount the bridge on a block between the top and bottom of the box, to prevent the tension of the strings from trying to crush the box. This of course will kill much of any acoustic response.

If mounting on a thin top, I would put the strings to the back of the bridge.

I think the biggest difference is that the tremolo version of this bridge has a solid "sustain block" which the strings go through from the back, this will make a difference to the output.
Taff

• ▶ Reply

Permalink Reply by Paul Craig on March 29, 2021 at 10:05am

If you have a through piece in the box that the neck is connected to or it's a neck through design, then you could add a small block between the top and between the bottom to give a sturdy construction. Then drill through the body using the bridge plate as your template. Then add string ferrules on the bottom of the box.

This will keep you from getting inside the box unless you make a wood block connected to the neck/through piece and have the box swing top on the bottom of the guitar that would swing open to allow access to electronics.

The added structure will increase sustain, but will kill off some of the acoustical properties. That can be a good thing or a bad thing.

• ▶ Reply

Permalink Reply by Seasick Mick on March 29, 2021 at 10:58am

Thank you,Paul...

• ▶ Reply

Permalink Reply by Seasick Mick on March 29, 2021 at 10:58am

• ▶ Reply

Permalink Reply by Carl Floyd on April 15, 2021 at 4:36am

"If you have a through piece in the box that the neck is connected to or it's a neck through design, then you could add a small block between the top and between the bottom to give a sturdy construction. Then drill through the body using the bridge plate as your template. Then add string ferrules on the bottom of the box."

Exactly.

Feel like I cheated with this old strat style neck I had laying around for years.  I wanted to get 3 strings on something while I studied up more on making a neck.  This one allowed me to ponder different options & make changes.  Not sure if I will actually add the pickup that I had planned to use.  May not ever completely finish this one.  I am busy working on the next one with a proper homemade fretted neck. 

• ▶ Reply

Permalink Reply by Paul Craig on April 16, 2021 at 12:15pm

Looks great.

• ▶ Reply

Permalink Reply by Seasick Mick on April 15, 2021 at 6:29am

• ▶ Reply

Permalink Reply by Carl Floyd on April 15, 2021 at 6:35am

Don't forget to click the HTML Editor just before posting, Mick.

• ▶ Reply

Permalink Reply by Seasick Mick on April 15, 2021 at 9:02am

I was wondering how you attached the neck...A couple of screws,maybe?...

• ▶ Reply

Permalink Reply by Carl Floyd on April 15, 2021 at 9:30am

Four screws, like a strat.  I have a mahogany heel that stick out.  Only two of the screws are visible from the outside.  I'd snap a pic, but I haven't yet gone back & sanded & finished the heel.

When you get to thinking about all the different ways to build a CBG, there are a lot of details to work out.

• ▶ Reply

Permalink Reply by Seasick Mick on April 15, 2021 at 10:11am

Finding different ways of making a CBG is part of the fun for me...Thanks for the info.

• ▶ Reply

Permalink Reply by Taffy Evans on April 15, 2021 at 5:26pm

Hi, this is how I do it. Neck block size varies depending on 6 or 3 string CBG.
My aim is to keep as much timber out of the box as possible if its an acoustic instrument. And the top as free to vibrate as possible.




Hope this helps Taff

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page