Well, now I gone and done it. I missed the mark on my zero fret by somewhere between .030 and  .040 of an inch. Everything must've slipped on me. The cut is square and pretty,  but way off. 

 I spent quite some time searching for options here, and on duck, but my search skills are weak.

I have a standard maple, prefretted maple neck with the scarf joint. Any help would be greatly appreciated.

 Ray

Views: 228

Reply to This

Replies to This Discussion

Hi Ray, I take it you have to reposition the zero fret. Two ways come to mind. First is to fill the slot with timber and refret the nut. Or, if the fret is wide enough file so the crown is off centre, in the direction needed for correct intonation. Or install a standard type nut.

Taff

 Thank you Taffy! Guess my next step is to  figure out which. Standard nut, or ... uh... "cut and paste"?... (groan)

Hi Ray, Not a big job, and if the zero fret is big enough it could cover the old slot repair. If it does cover it you could just fill the slot using the glue and sawdust trick. One way I do this is to put sawdust in the slot and run thin CA glue in, and sand back flush with the fingerboard.

Taff

 Hey there, Taffy, I opted to go with the standard nut. Thought about going with a hardwood nut, even cut one from mahogany and got a start on cutting the string grooves.. Not sure if it'll stand up to the strings. Got any thoughts you would like to share? Soaking it in super-glue? Different wood?

Hi Ray, Although Mahogany is listed in the hardwood category it is not really hard, like others on that list.

You could use plastic, like an old toothbrush or knife handle, or the like. Even fight with the dog to get the bone back.

What about the baking soda and superglue trick to create a hard surface for the strings to ride on? Thinking you could file oversized grooves in the mahogany, fill with CA/soda, then clean it up with a file and recut string grooves in the hard stuff.

 I saw something like this a couple of years ago, but it was to repair a bone nut. Something to keep in mind and experiment with someday... This neck is expensive, (for me), so I'll experiment with building that some other day. Thanks for the tip! It will be used.

 Ray

Agreed, I was only suggesting this as a way to toughen up the string grooves on a wooden nut, not for the neck itself. I used a walnut nut and saddle on my very first CBG build and it is holding up fine, but it's strung up with wound strings, not a lot of pressure relatively speaking.

 That's cool. I have wound strings as well. I also have a iroko nut  on an acoustic build and it's held up well, but thought about trying this to see if it helps sustain. You have inspired me.  Might try it tomorrow. Thank you!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
9 hours ago
BrianQ. liked Dar Stellabotta's video
9 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
12 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
12 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
13 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
14 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
15 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
16 hours ago
A.D.EKER commented on Ricky D's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->