I'm a newbie at this so please be patient with me. I've been trying to make my own necks but my woodworking skills are a bit clumsy. I've been able to make scarf joints but I'm very sloppy when I try to notch the headstock for the tuners. How bad would it be to make the neck out of 0.75" wood and then the headstock out of 0.5"? I'm sure the answer is somewhere but I just can't seem to find it. Many thanks in advance for any advice or hints/tips. 

Views: 185

Reply to This

Replies to This Discussion

Yes you can make a neck using different thicknesses of wood like that, in fact you’ll find plenty of that method if you search through the archives? But, I’ll leave you with this: the only way to get over your clumsy woodworking is to do more of it. Take it slow & easy, gradually work it to the correct thickness. Also, the right tool is essential too, sometimes a rasp can take off too much, too fast if you’re not used to one? I honed my woodworking skills on scraps every chance I got, I think you just need more practice. Good luck on your build :) 

https://www.cigarboxguitar.com/knowledge-base/a-step-by-step-guide-...

I think this is what you mean?

That's pretty much the way I do it.  I usually cut the scarf joint into my 3/4" board and after I glue it, I take the headstock piece down to around 13.5mm thick.  

Hi Brian, Thanks so much for responding, I really appreciate it. Without a doubt practice, practice, practice to get my skills up to speed. I'm less concerned about notching out for the body, simply because it's hidden (ok, that's the laziest excuse ever right). It's at the headstock that I'm more "on Show". I did a pretty good scarf joint but then butchered the headstock by gouging out way more than I should have. That got me thinking about using thinner wood for the headstock and the regular wood for the neck.
Again, I totally get what you're saying there are no short cuts (no pun intended) when it comes to this stuff.

Attachments:

Hi Sam, thanks so much for responding. I really appreciate it.

Make sure you’re using some quality hardwood for those thinner parts, better safe than sorry?

What is your process for notching the headstock? Using a Rasp, Chisel, Saw, Sander?  

Hi Brian, I’ve been using a dovetail saw and/or flush saw and then follow up with a chisel and a shinto saw rasp. I’m not the neatest but they’re pretty good, just not good enough for the headstock. I’ve been using oak 1x2 for my necks

It sounds like you’re making dado cuts with a Saw & chipping them out with a Chisel, then leveling it out with the Rasp,right? You’ve got all the right tools, you just need more practice with them. Have you tried thinning the headstock  just using the Rasp? The secret to a Rasp is a gradual, even stroke & some patience, but it’s real easy to get carried away with a Shinto they’re so dang sharp?

I recently just got back into building, and have been using 1x2's for my necks as well.  I bought this big miter saw at home depot for like $10 and I can get a really long scarf joints that are almost perfect right off the saw, I simply clean it up with a block plane and glue away.  Also this might be preference, but I much prefer the look and feeling of a scarf joint where the end grain ends up under the fingerboard.  (Top neck is a quartersawn "white wood" 1x2 from Lowes I couldn't resist buying and using, and the bottom is "mahogany" from Menards)

Thanks Sam for the great info

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
38 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
17 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
17 hours ago
Kent Thurston updated their profile
18 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
18 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
18 hours ago
Poorness Studios liked A.D.EKER's video
20 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
21 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
23 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->