Replies to This Discussion

Permalink Reply by Taffy Evans on September 13, 2020 at 12:43pm

Hi, you have a number of options, and I have used them for the same reason.

!- Angle/set the neck back to lower the strings

2- Raise the neck above the box top/face more

3- recess the hubcap into the body/box

Or a combination of the above. eg: angling/setting the neck back may cause the strings to hit the outer rim of the hubcap, so you may have to raise the neck above the face of the body more.

Simple straight line drawings will help determine to best projection of strings to the saddle. With measurements of course.

Taff

• ▶ Reply

Permalink Reply by Paul Said on September 14, 2020 at 5:12pm

Thanks Taff

• ▶ Reply

Permalink Reply by BrianQ. on September 14, 2020 at 9:13am

Have you searched through pics section for ideas? Maybe a pic would drum up ideas from other members?

• ▶ Reply

Permalink Reply by Doug Krantz on September 14, 2020 at 4:22pm

• ▶ Reply

Permalink Reply by Doug Krantz on September 14, 2020 at 4:24pm

• ▶ Reply