This could be git related or not. So, what's on your workbench at the moment?

I have 4 scarf joint necks in different stages of work.

A 25" scale pine 5 string neck for a Banjo-Res, A 25" scale Red Oak neck for my 6 string Strat-Res build, A 24 & 1/2" scale Red Oak neck for my 6 string Double Cut Tele build and a 27" scale 6 string Baritone Conversion neck for a Modern Strat body I have.

Views: 30898

Attachments:

Reply to This

Replies to This Discussion

I made a acoustic CBG style box out of Cedar awhile back. I did a thread on the build, but can't seem to find it now. I think it was in the Building A Cigar Box Guitar 101 group.

Paul, based on the experience, would you make more out of cedar in the future?

Cedar is soft, but it dries out and gets hard like Pine does with time. After I cut the pieces to length, I actually dried mine out in the oven at home in the kitchen with the vent going for an hour and a half before building.

I don't recommend doing that without knowing if the wood will put of toxic fumes or not. Still the best form of drying out wood is just like the oldtimers did it, outside and over time.

Yes I wood ;)

Cedar, Spruce, Fir and Pine are all in the same family, but many Southern species are to soft for my tastes.

Western varieties will be better suited. IMO I used cedar fence planks for my build. predrill any screw holes and if any of those woods are considered for making a neck, I would put in a trussrod just to be on the safe side.

I’ve seen softwoods like red & yellow cedar used for tops on dulcimers, but not without bracing? Yellow cedar is almost as hard as spanish cedar, and you know we love those Spanish cedar cigar boxes :D

What’s your wife say about drying wood in the oven, Paul? Back in the 80’s, I helped a friend of mine build the lumber kiln from Firefox vol. 3, worked great!

She didn't like it a single bit. Get a old electric or gas oven covereted to propane or a old large propane grill in your workshop and dry out wood as much as you want. Supervised that is, don't want anyone burning or blowing up the workshop on my ideas. ;)

I think I could get away with using the oven.  A couple years back I made a bunch of centerpieces for her, the base was a thin cross cuts from a log.  To be sure there were no bugs on them we sterilized them in the oven at the lowest setting for a couple hours.  I figure that sets a precedent, at least that will be my excuse.

Ray, stringed instruments like violins, cellos, violas & upright basses employ a spruce dowel between the front & back? Where it’s placed can change tone & resonance. The most favorable position is near the bass side of the bridge, which is also the best place to mount a piezo?

Hi Ray, the soundpost as Brian Q has explained is usually fitted in instruments of the viol family. The reason is that they sure played with a bow, so the mechanical action of the bridge is more side to side, than back and forth as a guitar or plucked instrument.
The quick explanation is not easy, but, I give it a go.

Under the bass leg of a viol bridge is a bass bar, a brace, running from tail to neck direction. Under the treble leg goes the soundpost, just behind that leg, and as BrianQ says its placement is critical.

To aid and control the "rocking", the side to side action of the bridge, the post is used as a firm point where the bridge can transfer energy. Not big on fancy words this is layman speak, ha ha. I hope you get the idea.

Bottom line is the top of bowed instruments have aconstant mode of vibration whereas plucked instruments have short sharp duration of vibration. Both methods cause sound waves in the air of the box, that exits the soundholes. It's the air motion that works the back. Sorry for poor explanation.
Cheers Taff

Hi again Ray,

to answer your actual question. There have been guitars built with sound posts, for whatever reason, but it is not a feature jumped on by builders in general. My thought is that unless the top and back were perfectly tuned to work together, as they are when soundwaves bring the back into play, the post could have a dampening effect on the top due to the back resisting top movement.

With stiff sides the vibrating energy from the strings is more directed tot he top and back. Even a soft timber neck can, I think, rob the box of vibrating energy.


Well you did ask......Taff

 Yes, I asked, and as usual, you gave very good, clear, valuable info and I am glad I asked. I kinda figured that with the post, the front and back might work against each other if not somehow tuned together. I wouldn't have the foggiest on how to do that, nor do I want to get that technical in building, yet.

 Thank you Taffy,

Ray

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

BrianQ. commented on Dar Stellabotta's video
59 minutes ago
BrianQ. liked Dar Stellabotta's video
1 hour ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
3 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
3 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
4 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
5 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
6 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
6 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
7 hours ago
A.D.EKER commented on Ricky D's photo
7 hours ago
A.D.EKER commented on A.D.EKER's video
7 hours ago
Keith Rearick liked Doug Thorsvik's video
11 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->