Hi to all: i salvaged this neck from a box i acquired: i have a few nice wood boxes of different sizes: i could use some ideas as to how to attach the neck to the box as it does not go through: see attached photos of what i have work with:  any help will greatly appreciated: sk

Views: 220

Attachments:

Reply to This

Replies to This Discussion

Hi Skip, first I would suggest that you ensure that the scale length of that neck puts the bridge in a suitable location on your new box.

I use a neck block and a heal, one inside the box and the other outside, this allows me to bolt the necks on without loosing too much space in the box.

In the photos the neck block shown is for a six string neck, but I converted it to fit a 3 or 4 string neck. For 3-4 string necks I use a smaller block.
I would also fill the recess at the end of the neck and cut out the top to take the fingerboard extension or modify the depth of that recessed area to slide under the top.

You have the box and the neck so it will be easy to work out what works best for you.

Cheers taff

Taffy: thanks for your reply: your photos are big help: i did a quick sketch as a possible: see photo: thoughts? the scale is fender,25.5: i will see where the bridge lands: at the lumber store i found poplar in the following size: all are 24" long by 1 1/2 wide: 1/4" 7/16" 1/2" 3/4": thought they could be used for bracing: was thinking bolt through for neck in the box and wood screw in the heel? any suggestions on fasteners? i have a few birds eye maple necks for future builds but would like to get this done first:thanks, skip

a couple more questions: are you saying i should remove some fret board to lengthen the neck so more goes inside the box or fill in the cut out on the neck and cut the box top to accept the neck and fret board? if i were to cut back the fret board would my scale length change or still do a 25.5 to bridge? thanks for all the help: 

No your fret board length, will not change, from removing some of the fret board.  Some people will only put 12 to 15 frets on, just because they don't play the higher notes.

Keith: thanks, stands to reason it should not change, but was not sure about it: it only changes when the distance between the frets change? hence the different scale: sk

Hi skip, its hard to advise you what to do as I do not know what tools or woodwork skills you have, I usually show what I do and leave any alterations to the builder to suit their situation.

In your drawing you show a small heal built into the neck already, and the neck is pretty much the same height as the box is deep, that does not leave much room for a system like I explained earlier. Here's a photo of what I do, I use either screws as used for detachable necks on Fender style guitars, or as shown here flat pack furniture connecting bolts and insert nuts.

I have included a picture showing what I would do if going the through neck method. Make the neck longer so it fits on a block at the tail.Of course the heal is glued to the box.



Where the neck mounts and the fingerboard sits [either over the top of the lid or up to the edge of the box/top] is determined by box size and bridge position.

Good luck Taff

Taffy: the pictures are what i needed: i am not committed to this box: i have others to choose from so i have options: as a traditional blacksmith i use hand tools and old ways to do my metal work: doing wood work follows the same approach: i like the mortise and tenon joint idea: thanks for the ideas and guidance: this web site is great: skip

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
5 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
5 hours ago
BrianQ. commented on Dar Stellabotta's video
10 hours ago
BrianQ. liked Dar Stellabotta's video
10 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
12 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
12 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
14 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
14 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
16 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
16 hours ago
A.D.EKER commented on Ricky D's photo
16 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->