Have a question about using some birds eye maple wood i have had for a very long time: the wood was cut by my grandfather in Eagle Lake Me in the 50s and he was going to make a work bench: that never happened: i traded the larger planks to a luthier friend to make guitars: i found these upstairs in my shop: would they make a good neck: i will post a few pics: the wood is 15/16" thick, length 36 'to 41'.   thanks, sk

Views: 337

Attachments:

Reply to This

Replies to This Discussion

If they’re quartersawn, yes, or you’ll get some bowing under regular tension? I’ve seen some beautiful fretboards made with birdseye maple. Great looking specimens 

Quartersawn wood 

i will check it out: thanks: sk

Oh no! that wood will never make a good neck. The best thing to do is box it up and ship it to me. I'll make sure it is properly disposed of. I'll even pay the shipping to help you out....

I wish I could say that without my nose growing.

Fact is, that wood will make some stunning necks when shaped and polished. If you build three or four stringers with reasonable sizes strings the total tension will not be too high and you should get minimal bowing.

You may want to build one neck with a piece of this wood, play it for a while and check for bowing. If you use a hard wood fret board, it will add stiffness to the neck. If you do get bowing, then take the small extra step of installing a truss rod on the next neck build. This is not a difficult operation and adjustable truss rods are cheap.

Another option would be to cut two 1" wide strips from a piece, turn the pieces 90 degrees and then glue them together. This would get the grain running up and down instead of left and right. That adds a lot of stiffness.

Finally, you could just ship it all to me.

Good find!

Build them, they'll be beauties! And the connection to your Grandfather is priceless. As stated by Tom below, I would add a fretboard.

Thanks for the advice: i will post more when i get ready to build: sk

I think they would be fine with any grain orientation for a three stringer, folks here have used softwoods so the maple will be better. As pretty as it is I would not use a fretboard either. Having said that if you think it is too soft you could rip the piece into several fretboards.

i would like to use it as is, like a maple neck strat: i have enough wood, so i have some options: i guess i ought to get some hardware and build it and see what happens: thanks,sk

Good you got it for free, a birds eye maple Strat neck costs about $200-350 

Not one to give advise, I'll just say what I'd do. I'd build one with a longish heel. Perhaps 2.5 inches past the box. I'd also go fretless and let the wood shine through with no distractions. Happy for you that you have such priceless stock. I haven't added a truss rod to any of my necks, but given the family connection, I'd highly consider it. 

Good luck with your build!

Ray

thank you for the suggestions: since the wood is about an inch thick, can i work the neck down to achieve a one piece heel or leave it the whole thickness and add on the heel? i can make one fretless: sk

This guitar was finished Oct 2017. It's still straight. At the nut it is 1 3/8 in wide, and about and inch and a half at the butt end of the guitar. It has no truss rod. Thickness is about .800 inch. It has CBGitty;s Blues Blasters largest acoustic strings. It has not warped. Maple is harder. Not sure this will help, but it is a bit more to chew on. HOpe that helps and doesn't just muddle things.

Ray

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
15 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
15 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
16 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
16 hours ago
Poorness Studios liked A.D.EKER's video
18 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
21 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->