When wiring two piezo in parallel. Are the disks stacked or placed side by side? 

Views: 190

Reply to This

Replies to This Discussion

You could do it either way, but if you stack them , you would have to insulate the back of the top one, right?

I place mine one under the bridge area and the other under the neck area so I guess side by side .. Hope that helps Rat . 

Thanks folks!

Yes BrianQ. I'd have to insulate between them. 

Jeff. I wasn't sure if folks kept them together. Of how far apart they could go. 

Hi Blue rat, the piezos surface has to have a good firm contact with the vibrating surface to work efficiently, the sensor piggy backing the other would not respond well to top vibrations. Insulating  them apart would further decrease efficiency. I have not tried it but that is my understanding.

Taff

Thanks Taffy. Having to insulate between the two would farther dampen it's response. 

I commented on another post on how I will never get that awesome CBG sound out of a quality pup. I have a one pickup guitar build that is glued together but not set up yet. The only good spots I can reach would be directly in front or behind the bridge. 

The back of the guitar is 1/2 plywood. There's less than a 1/2 inch of space between the old door wood and face of the guitar in front of the bridge. And access behind the bridge is tight. Because of the jack support block. That piece of ply marked "E". Yes I mark each piece as it's cut now. Keeps me from cutting a piece out of an already cut piece. Real good at doing that. :) The only other step I'll need to do is drill a third hole for the piezo volume knob. Both pup types will be wired for independent operation so I wont need a switch.  

Hi, in the acoustic six string guitars I build the piezo sensors ,three in total, are recommended by the manufacturer to go under the saddle in between strings 1-2, 3-4 and 5-6 glued to the bridge plate. So the area you mention for your guitar should be good.

Taff

Thanks again Taffy. Any idea of the impedance of three piezo in a row? I was going to slap a Duncan Vintage rail. After getting the idea of finally using piezo the pickup will be the middle pickup from the Fender 69's that'll go into the body I just cut apart. It's output imp is only 6.5. 

SorryBR, I'm not into that sort of info, can't help you there.

Taff

Thanks Taffy. Don't sweat it. Been all over the web looking for info. Haven't found a single direct answer. Yes I understand that an 8 ohm speaker actual ohm reading depends on the frequency going through it. The average is 8 ohms. For a piezo? Not a strait answer or average anywhere. Plenty of charts with lots of X's and Y's. But with no value given to a single one of them. All you end up with is badly spelt words.  I did find out that most upright bass preamps have an impute (the connection between the piezo and preamp ) of 1Mohm. So I can guess with some success that two in parallel will be 500Kohm and three would be ( not quite right ) 330K ohms. And so on. I did read years ago that there is a number of piezo you can't go past. But there was no reason given. 

Hi BR, also maybe the quality of the piezo my affect your calculations, like three off one brand may be different to three of another brand.

Taff

I generally try to place mine close to but on the neck side of the bridge. One just outside of the bass string and one just outside of the high string. I shoot for those spots but often have to move them a little to accommodate sound holes or braces.

Thanks again everyone for your responses. 

What I'll end up doing is first glueing them to a piece of foam. That will be glued to a small piece of ply. Lather to the top sides with lots of hot glue and stick em in place. One shot. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on Dar Stellabotta's video
Thumbnail

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

"i See Your ready to Blow away the GRAND STADIUM ! tree strings more of DAR DELIGHT !! Shine Girl !…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you for the kind comments Doug! Glad you liked the Picture !"
7 hours ago
BrianQ. commented on Dar Stellabotta's video
11 hours ago
BrianQ. liked Dar Stellabotta's video
11 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Project Punch!

" Thank ya again Keith!"
13 hours ago
Southern Ray commented on Southern Ray's photo
Thumbnail

Punch Project!

" Thank Ya Keith!"
13 hours ago
Doug Thorsvik commented on AGP #'s photo
Thumbnail

AGP #527 - ''Led-Zep 2''

"This build really strung you along Alan! Reminded me of all my fishing line experiments; a lot of…"
15 hours ago
Doug Thorsvik commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Diggin’ the slow blues. I like that last pic Andries! Look at all those cool guitars. Yeah!!!"
15 hours ago
Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
16 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
17 hours ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
17 hours ago
A.D.EKER commented on Ricky D's photo
17 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->