Finally got this CBG done and strung. The problem is one of two things(in my mind anyway) 1_the strings (Southbound) 2 wound 1 not. Tuned EGg (on edit GDg)

2scale 25 1/2 everything was remeasured frets. At 25.5 12th fret all 3 strings run slightly  on the sharp side. Moved bridge toward tail 16th" +/- G & D dead on, g runs more to the sharp side. Should I restring with a wound set and start over? I've never had this problem before so it's new to me. The gitty has nice tone and volume but that g sounds off to me when I pluck the open string. But the tuner says it's dead on. So what in the Sam hill is going on?

Thanks KD

Views: 330

Reply to This

Replies to This Discussion

Hi Hooch, moving the whole bridge back 1/16 will not suit all strings. Different diameter strings often require different compensation. If that string is dead on when played open, is it dead on fretted at the twelfth fret too. 

If it is, then maybe the other two strings are out. Adjust them also for correct intonation.  

Its a bit hard when you don't have the guitar.

Taff

G D are dead on at 12th g gets worse I'll try skewing the bridge and see what happens! I really am suspecting the g, may replace it with a wound and see if it makes a difference. Thanks Taff, I keep an update.

A heavier string may require more compensation, and may not get to the required pitch. You show a capital G and a small g, are they and octave apart?

Taff

Yes, the standard GDg tuning.

Hooch, what are you drinking? You said  EGg. Ha ha.

Taff

Lol , That was Otto's fault I type one thing he types what he thinks I meant and I wasn't wearing my glasses to catch him at it. I'm sure you've met Otto, his full name is Otto Correct, and it's a pita. Good greif

If it's a fretted neck high action can also play hell with intonation as you will be stretching the string more to reach the fret, making it slightly 'sharp.'

Here's a typical acoustic bridge. Note the angle and that treble side/higher strings are also closer/lower to the top, which also makes them shorter.

If you've ever watched someone set up a guitar the treble side is always set a few thousands less than the bass side.


I quickly glanced over This this morning and wasn't paying the attention it deserved. I always wondered how was it every acoustic guitar didn't have the bridge skewed like CBGs. Very interesting,thank you for sharing. Is there a formula for laying out the height for strings on the bridge?

Changed out the high g from a 9 to 11 and started over. So far so good! Thanks everyone hopefully it sticks.

Hi Hooch, the actual bridge is not skewed but the saddle itself is angled to give strings compensation.As a rule and guide with medium strings on a six string guitar, measure the scale length and add a 1/16" to the first string and 3/16" to sixth string. Then of course this is fine tuned to suit action height.

Taff 

When I place my bridge on the CBG top(usually a bolt for CBG's), the middle of the bolt(center string for 3 or between middle 2 of 4) is right on at the scale length from the fretboard side of the nut. Low string side end of bridge bolt is 3mm away from end of fretboard and high string side end of bridge bolt is 3mm towards the fretboard.

This formula has worked everytime on my CBG's and other guitars as well.

As someone else mentioned, string height can pull the string sharp while fretting if the initial string height is too high.

I've been using guesstimate/looks right method and it servers me well, until this build. Nothing I did worked. So I went back and reworked everything ( cut nut deeper, changed back angle and the string) basicly lowered action. It sounds awesome. Its been delivered and they're happy!

Thanks for the tips and advice everyone, greatly appreciated! I'll remember the 3mm trick. I've been curious about a formula, one of the fret calculators has the information, but if you don't know, ' you don't know' what to do with it!

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Glenn Kaiser posted photos
2 hours ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Glad to put a smile on your face BrianQ! This one is a fun one to sing and play."
2 hours ago
BrianQ. liked Doug Thorsvik's video
3 hours ago
BrianQ. commented on Doug Thorsvik's video
Thumbnail

Da Do Ron Ron: 3D Printed Cigar Box Guitar

"Another great oldie I thought I’d never hear on cbg!! :)"
3 hours ago
Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
6 hours ago
Matthias Bichsel left a comment for Moritz Voegeli
"www.cbguitars.ch auf FB This Bichsel"
yesterday
Matthias Bichsel left a comment for Moritz Voegeli
"Hallo, ich bin aus Solothurn. Lisa Stearns hat mich gefragt ob ich Dich kenne. Ich baue cbg. Gruss…"
yesterday
Matthias Bichsel liked Moritz Voegeli's profile
yesterday
BrianQ. left a comment for John Herrick
yesterday
BrianQ. left a comment for Daniel Cook
yesterday
BrianQ. left a comment for Skip Novakovich
yesterday
T-Gripped liked David Woodman 's photo
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->