Replies to This Discussion

Permalink Reply by Timothy Hunter on November 30, 2019 at 1:05am

doesnty matter how its built hand held or a rig like the video you showed. for a 2" bit of nichrome wire to burn a fret line on a neck all you need is a 9V battery. all very safe except for the wire itself that gets very hot. use an old car battery if you want. DC is safer than AC. 

• ▶ Reply

Permalink Reply by James Pobog on November 30, 2019 at 3:15am

What about the DC amps?


Would something like this work? (obviously with the output terminated differently)

https://www.amazon.com/100-240V-Converter-GraceMe-Cigarette-Refrige...

• ▶ Reply

Permalink Reply by Gus K on December 3, 2019 at 4:05am

Don't you have any AC to DC adapters (wall warts) laying around to try?  I sure do.  I think this should work.  You could plug into a cheap switched power strip.

https://ebay.to/2rOCPjW

• ▶ Reply

Permalink Reply by BrianQ. on November 30, 2019 at 8:14am

seems like a lot of work to replace a Square & a Woodburner, just saying?

• ▶ Reply

Permalink Reply by Taffy Evans on November 30, 2019 at 8:34am

Yep I agree Brian Q. At least with a wood burner you can change the tips and do fret position markers too.

Taff

• ▶ Reply

Permalink Reply by James Pobog on November 30, 2019 at 8:42am

Brian and Taff...

I tried a soldering iron with a needle and chisel tip and while it works, I was not happy with the time or result. There's just something about that hot wire making a perfect line that resonates with me...


BTW I just looked closer and the resistance on the wire I bought is 1.31 ohms/ft.

• ▶ Reply

Permalink Reply by BrianQ. on November 30, 2019 at 8:54am

I’m using a real wood burner, not a soldering iron, anything takes a little practice, even with the right tool? 

• ▶ Reply

Permalink Reply by James Pobog on November 30, 2019 at 1:08pm

What's the difference?

• ▶ Reply

Permalink Reply by Gus K on December 4, 2019 at 10:31am

I thought the gizmo in the vid was pretty cool and well thought out.  Some folks just like making things  :)  

• ▶ Reply

Permalink Reply by James Pobog on December 4, 2019 at 10:40am

That'd be me...

To be honest, it's something I discovered about myself not long ago. Never knew before that I could do it...

• ▶ Reply

Permalink Reply by Jim Saraceno on November 30, 2019 at 9:09am

Is there some reason you didn't wan to use an automotive battery charger like in the video?

• ▶ Reply

Permalink Reply by James Pobog on November 30, 2019 at 1:07pm

Mainly because of pushback from here...

• ▶ Reply

• ‹ Previous
• 1
• 2
• Next ›
• Page