Just got one for use with a fret burner. Since it is a power supply usable several ways, is it a viable idea to put a dimmer switch between the Variac and whatever is being powered? That way you could set the voltage on the Variac, but do the controlling with the dimmer,  the dimmer maxing out at the set voltage. With proper operation, you'd never blow anything up, the power can never go overlooad.

Views: 231

Reply to This

Replies to This Discussion

Not sure why you would need one. Wood burners don't use that much energy. 40 to 60 watts. Around the same power usage as a 60 watt light bulb. A dimmer switch at a medium setting would make your wood burner useless. Think of it as temp is equal to energy used. The lower the energy the cooler the tool will be.  

Guessing a fret burner is what's used to burn fret lines in with. 

I should have been clearer. I'm gonna build one of these...

https://www.youtube.com/watch?v=5_8RURFh_kc

My point is that as I described, I think that if the wire needed X, and the variac is set to X, the dimmer might become sort of a safety, the final output never exceeding X no matter what the variac is set to...

A variac  is a big dimmer itself, why would you need another? 

To set a limit.

Not to ruffle any feather here but what I saw in at video was someone doing something incredibly dangerous and stupid. It's one of those things that just because it can be done doesn't mean it should. There are far better, safer and cheaper was to get the same thing done. 

Please explain...

First. There is no protection between him and that wire. No protection if that wire should explode. I've seen what happens when a small piece of heated material enters the body. It causes a very wide and deep burn. That's a sorry way to lose a hand. Even if he accidentally touches that wire he could lose the use of a finger. 

Second. He has open current within reach. Ever hear of a taser? They are DC current too. People can die from a taser strike. What he has in front of him has way more current flowing through it. He is risking his life.

Bump...

Is there a safe way in your opinion to create such a device?

Completely incase both the electrical hazard and the heat hazard so there's no way to come in contact. This would also insure no moisture would touch the heating element. You would have to come up with a way to line the fretboard up without ever directly looking at the element. Possibly a templet and peg system for each scale length needed. 

Isn't nichrome wire made to be filament? Labeling says it's good to 2550F...not that I'd ever be up there...

Touching the business end of a soldering iron will burn you. Touching anything red hot will damage you. Having something like that out in the open is asking for trouble. 

Do what you want, Just saying that setup is insanely dangerous.  

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Doug Thorsvik posted a video

Da Do Ron Ron: 3D Printed Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 198th Zoom Mtg 04/15/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG Songbook.pdf...
1 hour ago
Matthias Bichsel left a comment for Moritz Voegeli
"www.cbguitars.ch auf FB This Bichsel"
20 hours ago
Matthias Bichsel left a comment for Moritz Voegeli
"Hallo, ich bin aus Solothurn. Lisa Stearns hat mich gefragt ob ich Dich kenne. Ich baue cbg. Gruss…"
20 hours ago
Matthias Bichsel liked Moritz Voegeli's profile
20 hours ago
BrianQ. left a comment for John Herrick
20 hours ago
BrianQ. left a comment for Daniel Cook
20 hours ago
BrianQ. left a comment for Skip Novakovich
20 hours ago
T-Gripped liked David Woodman 's photo
21 hours ago
Profile IconJohn Herrick, Daniel Cook and Skip Novakovich joined Cigar Box Nation
21 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

The Blues riff a Tutorial BCB 2024

"Yup Doug ! standart tuning for the four that el be missing the E's ADGB ,on the 3 Tree String…"
yesterday
Max commented on Max's video
Thumbnail

My second guitar

"Thanks everyone, yes well and truly hooked haha. If I ever put this one down it's to make…"
yesterday
Southern Ray replied to Moritz Voegeli's discussion Joseph J. Rogowski about Current Based Pickup Design
" A few years later... Thank you."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->