I found out until I have surgery on my eyes, "STOP trying to read a ruler!" I pains takenly and as precise as I could be laid out the frets for a 25.5" scale, each time check it (even with dial calipers) I would be off by a football field. Then I borrowed my buddies  guitar laid my aluminum yardstick down and marked "all" neccisary components, took it home laid it down to compare notes. I suck at this! I have the 25.5" scale covered and will have 24's covered when my neighbor gets back from vacation.(has all the CB GITTY templates) the one I need I can't find, it's a one and only time! Is a 30.5" scale fret layout! If anybody has it and willing to share it on a full-size strip of paper, be more than willing to pay postage as well be grateful for your help. Even with a magnifying glass the markings on a ruler are blurry. If you are willing to share pm me and ill give you my address. Thanks

Views: 258

Reply to This

Replies to This Discussion

I always use the fret calc that's here

http://www.gedgreen.co.uk/?page_id=186

What I like is that it's on my PC and will print the scales. I just lay them on the neck and cut through them knowing that I can always print some more with a few clicks.

These are some great programs. Thanks everyone for the help!

You're welcome

Well Hell's Bells, spent 2 hrs at Office Depot on 3 different printers including one used for blueprints. No luck with fret guide.

Well Hell's Bells, spent 2 hrs at Office Depot on 3 different printers including one used for blueprints. No luck with fret guide.

whats wrong? if the nut to 12th fret doesnt measure 15 1/4" then find out what it is for example say it measures 15",then 15.25/15 x100  means you need to print at 101.6% size you would need to pick either 101 or 102.. i would go for the 102 seeing as it is printing small. if the measured is bigger than whats expected then print at 99% or what ever it works out to be. 

Thanks Tim, I'm so damn frustrated over the whole thing. I called a blueprint printing shop this a.m. and she thinks she can get it for me, if not back to the firewood stack with it. Where were you yesterday? LOL

Ha Ha! Timothy Hunter you sir are a friggen genius! I tried that on my ole crappy printer and it's dead on the money. Hot damn! Now I can get the stuff off the fire heap. Thank you for the tip, you made my day.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

Busking Songs...

Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods 19 hours ago. 7 Replies

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

Latest Activity

Carl Floyd liked Moritz Voegeli's discussion Joseph J. Rogowski about Current Based Pickup Design
2 hours ago
A.D.EKER commented on Dar Stellabotta's video
Thumbnail

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

"Great Sliding ! But to be honest i dont hear that much a differens,  beleave the Glass is a…"
6 hours ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Up the Hill A D Eker 2024

"thanks AGP;# ! much appriciated !"
6 hours ago
Crazed Fandango added a discussion to the group Introduce Yourself!
Thumbnail

Better late than never...

After joining this forum in 2014, I finally have my 1st CBG which my wife bought for me at the…See More
9 hours ago
Bernie Edwards liked J. D. Woods's photo
9 hours ago
Crazed Fandango joined Cigar Box Nation's group
Thumbnail

Introduce Yourself!

We wanna know who you are! Where ya from? What'cha buildin'? This is a place for new members to…See More
9 hours ago
Crazed Fandango liked Nomad Jack's discussion Busking Songs...
9 hours ago
Fantacone Box Works commented on Dar Stellabotta's video
11 hours ago
Fantacone Box Works commented on Ghostbuttons's photo
Thumbnail

Four projects

"Very nice"
11 hours ago
Dar Stellabotta posted a video

Wooden Guitar Slides from Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿 Demo!!!!

In this video I compare the three different wooden slides made by David Bell and Phil Young up against my Dunlop glass slide! I gotta say these wooden slides...
12 hours ago
Fantacone Box Works posted a status
"Thanks Brian. We'll that's mighty exclusive."
12 hours ago
Ghostbuttons commented on Ghostbuttons's photo
Thumbnail

IMG_2850

"Four recent projects. All 23 inch GDG. From left (bottom): 1.  20 years ago I worked for the…"
12 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->