Replies to This Discussion

Permalink Reply by Randy S. Bretz on May 25, 2019 at 12:02am

These 3 are alumilite a synthetic material. But I also use exotic w...

• ▶ Reply

Permalink Reply by Randy S. Bretz on May 25, 2019 at 12:04am

• ▶ Reply

Permalink Reply by Bruce Young on May 25, 2019 at 2:13am

Nice looking. 

• ▶ Reply

Permalink Reply by Daniel Walter on May 25, 2019 at 8:33am

I still respectfully submit that a dense hardwood works. Square it up, large piece against the fence. a zero clearance insert does help, sometimes the thin piece wants to slip under a regular insert, and pulling it out near the blade is not an option. Anyone ever try bocote? comes from mexico, they still cut it down the same way. two mules going back and forth with a long chainsaw blade flat. very dense. Will not accept a oil based finish, won't dry. (ask me how I know) .Brian, my off color remark was because I believed Bruce's ivory is real Sorry, it was late. Here's a piece of zebra wood i cut thin, for a shim. Not for picks, just had this photo. 

• ▶ Reply

Permalink Reply by Bruce Young on May 25, 2019 at 9:52am

Argh! It is real ivory. 

I know Bocote. Pretty, self oiling if I remember right. Like cocobolo, Sand to 1000 and polish with dry cotton wheel. I used to do gun grips and knives, as well as precision small boxes. I’ve used lots of exotics.  If I still had a table saw, I’d make a sliding insert with its own fence that only had a blade kerf slot. 

• ▶ Reply

Permalink Reply by Daniel Walter on May 26, 2019 at 8:30am

had to reply to the bocote. very dense, and beautiful, because the pretty pieces are sapwood, creating the outstanding grain. "self oiling" because of the sap. although the sap is as hard as a rock as well. make great gun grips and knives. my brother gifted me a large piece he picked up in Washington, Dc. i cut a fretboard. there was a scratch, have one of those stew mac flat sanders, after a half our of off and on sanding, the scratch was still there. then i decided to cut plugs from the same wood for fret markers, and cross the grain. talk about smoke. then put a poly finish on, like i said, wouldn't dry, sap repelling the oil. Used it for my special tuning macing invention, the bocote was hard enough to drill and tap. If anyone finds some, use it. one pic, gotta take a good one of the fretboard.

• ▶ Reply

Permalink Reply by Bruce Young on May 26, 2019 at 8:40am

About 20 years ago, when I was doing little dovetail top pill boxes, a few jewelry boxes, etc, my dad picked up a box of exotic end cuts from a local dealer (they sell online now, at astronomical prices). They were cheap then, considers too small for cabinet makers to buy. I had bocote and Purple Heart, cocobolo, bubinga, etc etc. a box as big as a case of liquor for like $30. I kept a brand new cotton buffing wheel for the stuff like bocote and Purple Heart and cocobolo. The wheel would warm the piece and bring the oil up, and if sanded to 1000 first, shined like French polish. 

• ▶ Reply

Permalink Reply by Daniel Walter on May 31, 2019 at 11:32am

Nice. You were making dovetail boxes?! Dovetails are something I haven't tried, just to me seem like a Chinese puzzle. Just can't get it in my mind how the pieces fit together. Especially without one of those speciality jigs, which I don't understand either, unless I had one in my hand. Purple Heart is another "as hard as rock" wood. I used it the full length of one of my necks for static reinforcement. Martin used a steel T shaped piece for static reinforcement until around 1976, and still now sometimes. Do you use truss rods? 

• ▶ Reply

Permalink Reply by Bruce Young on May 31, 2019 at 11:40am

I did the dovetails using a tapered dovetail cutter and the Sherline milling machine. Done right, the fit is amazing. I’ve done “bar of soap” looking pill boxes that for all the world look like a rounded off block of wood. I’ve handed them to people and they don’t understand that it’s a box, until I slide the lid open with my thumb. Did a Purple Heart jewelry box sanded to 2000 grit and waxed with butchers bowling alley wax, that was literally a mirror finish like metal. It was fun. 

• ▶ Reply

Permalink Reply by A.D.EKER on May 25, 2019 at 12:02pm

Yep i cut my own ,i have a pickcutter ,i use old credit cards and get 4 -5 out of one card ,it depends on the quality card how long it lasts, but in general pretty good .
so its defentive worth to buy a pick-cutter.

• ▶ Reply

Permalink Reply by A.D.EKER on May 25, 2019 at 12:24pm

• ▶ Reply

Permalink Reply by Lonman on May 26, 2019 at 6:37am

yup, much easier than cutting them with scissors.

• ▶ Reply

• ‹ Previous
• 1
• 2
• 3
• Next ›
• Page