Looking  for ideas on supporting a nut from the back side on a scarf joint other than grooving out a notch for the nut to fit into.

Seems I saw a pic of a build once where their was some support behind the nut on the tuner side so it was supported from the front on the fretboard end and back

Thanks

Views: 400

Reply to This

Replies to This Discussion

I saw one someplace( sorry looked at so many videos and pictures) where the bone or ivory nut had  2-3 countersunk screws into the fretboard from the tuner side. Also saw some where the head had a piece of wood laminated and shaped like the head. The nut was resting between that and the fretboard. Hope that helps. BTW that's what I'm doing on my build.

I found the picture for the nut between the fretboard and head veneer. This is from "ADVANCED CIGAR BOX GUITAR BUILDING GUIDE" a free download. I know this is probably late, but for future reference.

Attachments:

I found the picture for the nut between the fretboard and head veneer. This is from "ADVANCED CIGAR BOX GUITAR CONSTRUCTION GUIDE" a free download.

I've been using a bolt/screw for a nut on my CBG's for awhile now. I use a half-round file to make a groove for the screw. I usually add a drop of super glue so it doesn't fall off when changing strings.

Gluing or screwing a piece of wood in front of the nut is a good idea and usually looks better.

Hi,

My name is Jerry and I'm a nut. Self-supporting, but I have been on the dole too, as well...yeah it seems a bit of wood behind the nut, clamped n glued would do the trick...I personally like a big zero fret unless I'm going for higher action at the nut.,.,,.best wishes on those new builds......

I’m not sure, but are you describing the support in my pic?  If so it is a CB Gitty product.  By the way, this is more of a string placement, because the “nut” is a fret, a zero fret.  

That's very similar to the one I was describing, but it was bone or plastic and the screws were countersunk.

They have those at guitar fetish if you’re not feeling adventurous?

https://www.guitarfetish.com/Floyd-Rose-Headstock-String-Retainer-B...

Hi Brent, lots of good ideas here. Most of the time I just glue my bone or ebony nuts up against the end of the fingerboard and the surface of the peghead. Never had an issue, may not work in every situation but when I do use it, it works fine.

Taff

Agreed

Yup . . . that almost always works. No need to reinvent the wheel on this.

I generally use a zero fret, but glue a bone or plastic nut against the end of the fingerboard for use as a string guide.

Prior to the gluing, test fit the nut both for width and string spacing. Then, file the string slots deep enough that they're right at fingerboard level. A couple drops of super glue and you're good to go.

It's quick, simple, and effective.

As a side question, can you use a fretted bridge as a nut????

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
24 minutes ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
1 hour ago
A.D.EKER commented on Ricky D's photo
1 hour ago
A.D.EKER commented on A.D.EKER's video
1 hour ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked A.D.EKER's video
5 hours ago
Keith Rearick liked Doug Thorsvik's video
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago
Keith Rearick liked Ricky D's photo
5 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->