Hello there!
Yesterday i discovered cigar box guitars and i was hooked immediately :). I started today with my build (a nice Free Cuba box i found years ago) and due to my inexperience and the difference between the box in the tutorials and my box, i made some errors. I didn't think about the need of a seamless transition between box and neck. I attached some pictures so you can see.
Because of the big lid, there's quite a gap between the neck and the box. Could i just glue another piece with the remaining height on top of my neck? Maybe also take some wood from the bottom of the neck to make it less bulky?
In addition, there's a gap inside the box between the neck piece and the top of the lid (around 1.4cm/0.55 inches). I've read that you can glue the neck and the box together or leave a little space, but that amount of space would be too much probably? So should I glue a piece on the neck inside to touch/come closer to the top of the lid? Would it be able to resonate properly? Or should I discard this project and start over with a new box?
Im sorry for asking this many questions, I'm just a little frustrated right now. I hope you can understand my problems.
Thanks in advance,
Toby
Tags:
Here’s a video of how to better prepare your neck for the box
https://m.youtube.com/watch?v=2W6A38lMgJ0&list=PLQoYJG1ht92f3gc...
Welcome to CGB addiction. Don't be discouraged with your first build. There "WILL" be more. Use this one as a good learning experience.
Now to the current build. You "could" add a piece of wood on top of your existing neck to make it flush (or about 1/4" higher than the box lid, but I wouldn't. It's gonna look weird, weight too much and be a pain in the ass to play.
Instead, consider notching the box lid so the neck rest against the top-inside of the lid. then, notch the neck where it goes inside the box by about 1/4". That will raise the neck, when installed, to slightly above the top (outside) of the box. Look at photos of cigar box guitars on this site and you'll see what I'm talking about.
Now, there will now be an opening in the side of the box below the neck since the neck has been raised up. use a piece of wood (the slide in liners of a cigar box would work well) to build a nice looking neck surround that hides the hole.
You should now be close to a normal cigar box guitar. Work toward building it right instead of compensating for problems and you'll have a playable guitar.
Do some YouTube searches of building CBGs and you will find lots of helpful vids.
Good luck
Hi Toby and welcome, my first advise, and its what I do is not to glue my necks in, but to screw or bolt, easy if you have a lid that removes easily. Makes it easier to learn the tricks of setting up, I think.
Also as the top is the most important component in the acoustic sound chain, so don't dampen its vibrations by having it touching anything in side, except maybe a brace if needed.
Here's a few photo's of what I have done in the past. Left a few steps out but you should get the idea.
Awesome design. on another blog i was going on about thru necks, but mentioned any thought out design works. This is a great example, very nicely built. Actually a setup like this takes more time and patience than putting the neck through anyway. Wood glue is truly an amazing thing, what they say about a good glue joint being stronger than the wood is true.
Started by Rich Butters in Building Secrets, Tips, Advice, Discussion. Last reply by Crazed Fandango 14 hours ago. 4 Replies 0 Likes
Started by Southern Ray in Other stuff - off topic, fun stuff, whatever. Last reply by BrianQ. 18 hours ago. 2 Replies 0 Likes
Started by J. D. Woods in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Saturday. 7 Replies 1 Like
Started by Nomad Jack in Performances, How to Play, Lessons, Concerts. Last reply by J. D. Woods on Wednesday. 7 Replies 2 Likes
Started by Moritz Voegeli in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 14. 6 Replies 2 Likes
Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Apr 10. 14 Replies 3 Likes
Started by Tom T in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 9. 9 Replies 0 Likes
Started by Southern Ray in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Apr 4. 7 Replies 1 Like
Started by Timothy Hunter in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 27. 1 Reply 2 Likes
Started by Taffy Evans in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Mar 10. 1 Reply 3 Likes
Started by Cigar Box Nation in Feature Articles. Last reply by BrianQ. Mar 9. 4 Replies 3 Likes
Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies 1 Like
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies 0 Likes
Started by Ken I in Building Secrets, Tips, Advice, Discussion. Last reply by Brian partington Mar 8. 8 Replies 0 Likes
Started by Southern Ray in Cool gear discussion - that's not cigar box related. Last reply by Southern Ray Mar 6. 5 Replies 0 Likes
Started by Taffy Evans in Other stuff - off topic, fun stuff, whatever. Last reply by Taffy Evans Mar 5. 4 Replies 2 Likes
Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Carl Floyd Mar 1. 15 Replies 0 Likes
Started by Joe in Performances, How to Play, Lessons, Concerts. Last reply by Carl Floyd Feb 29. 13 Replies 0 Likes
Started by Chance in Building Secrets, Tips, Advice, Discussion. Last reply by Southern Ray Feb 22. 12 Replies 1 Like
Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies 4 Likes
Posted by Vlad on March 31, 2024 at 11:48pm 0 Comments 1 Like
Posted by Vlad on March 6, 2024 at 2:32am 5 Comments 2 Likes
Posted by billy jones bluez on February 28, 2024 at 2:09pm 0 Comments 0 Likes
Posted by billy jones bluez on February 17, 2024 at 11:00pm 0 Comments 0 Likes
Posted by Vlad on February 11, 2024 at 1:06am 1 Comment 1 Like
May 11, 2024 from 11am to 8pm – Speakeasy Grill
0 Comments 0 LikesMay 30, 2024 from 6:30pm to 10pm – The Casual Pint of Huntsville
0 Comments 0 Likes© 2024 Created by Ben "C. B. Gitty" Baker. Powered by
Cigar Box Nation is presented by C. B. Gitty Crafter Supply, your one-stop-shop for Cigar Box Guitar parts and accessories!