"Two Hour" Hammer Dulcimer plans by Sam Rizzetta

"Even a crude dulcimer can have an attractive tone and be as easy to play as more sophisticated ones."

PDF Scan from Mugwumps Magazine, Vol 2. No. 4, July 1973   

A classic set of plans for simple hammered dulcimer.  Parts needed:

A CALL TO IMPROVE THESE PLANS:  These original plans from 1973 give us a rough outline for making a simple hammered dulcimer.  However, they contain some vagueness when it comes to design and parts.  For example, the author suggests using "sturdy nails" as hitch pins.  What exact nails would you use?  Also, he recommends a 2x4 as the frame, but wouldn't the softness of the pine wood eventually release the zither pins and cause tuning problems?

I encourage you to post your improvements in the comments below.  If you build a hammered dulcimer, take some time to post a builder's diary of the process.

PDF Download: Two Hour Hammered Dulcimer Plans  

About these plans:  In researching various obscure musical instruments, I have discovered the treasure trove of information from Mugwumps, a now defunct magazine originally published by Michael Holmes of Silver Spring, MD.  The bi-monthly journal celebrated old time music, unusual folk instruments and served as a classifieds for the emerging bluegrass community of the 1970's.

Views: 3533

Reply to This

Replies to This Discussion

I was just working on Gitty's marketing when I stumbled across this customer submission for a 19 string mahogany monochord instrument.  Note the string anchor system that uses Gitty's Chrome Cup Style String Ferrules. See the original post here.   

Thoughts?

 

Also, love the mahagony monochord!

Thank you for this!   Shame the plans  doesn't give the  measurements for the spacing of the tuning pegs

Thank you for the plans.  Shame it doesn't give the spacing measurements to the tuning and hitch  pegs

I built a zither aeolian harp a couple of January ago. It's based the 2 x 4 lap steel model. I just kept both ends of the two by four lap steel and made a box around them. Then added 12 Zither strings bridge and nut. The string hitches are the same as on the 2 x 4 lap steel. Scissor pins have never clown loose in two years time. Just make sure you drill the proper size hole. Scissor Pens have superfine spiral threads! They will screw in and out.
Stupid speech to text. I meant to say zitherr pins have never come loose in two years time. Scissor pens translates to zither pins. If I can figure out how to upload upload photos, I will do so. I'm a little bit technologically challenged here.

Let's try this: here is a photo of my zither/aeolian harp, as described in my post this a.m..  BTW, you can use chalk on the zither pins to help keep them slipping. Powder chalk specifically for pins is available, I just used strait-line chalk, you know, like for snapping a line. Drop some in the hole and shake out the excess.

The text specifies piano pins. They are considerably larger than zither pins and will probably work OK in a pin block made from a two by four, at least for a little while. With the smaller zither pins (a better choice, in my opinion) it will be necessary to use a harder wood. Maple is a good choice. Use a sharp drill bit, clean holes will hold tuning better. Don't make the holes too small, the block will split when all the pins are turned in. The pins should be just tight enough to hold the string tension. It will help to set up a test jig made of the same material as the pin blocks you will use. Stretch a string over three bridges between a hitch pin and tuning pin and see what happens with different hole sizes when tuned to pitch.

I use a jig to drill the pin holes. Lay out the pin pattern on a 1-1/2 or 2 inch thick piece of hardwood and use a drill press to drill the jig. It can then be clamped to the dulcimer body and used as a guide for a handheld drill. If desired, bevel the bottom of the jig to create angled pin holes, a better design.

I prefer to use desk pins as hitch pins, but nails will work. Be sure to drill pilot holes for the nails. Don't just pound them in with a hammer, that will encourage splitting. The string tension on a hammered dulcimer is formidable. Hitch pins should definitely be set at an angle. Use the test jig to determine the best size of nail to use. A six or eight penny finish nail might be a good place to start. Nails are soft, don't let them stick up too far or they will bend. Keep the string wrap close to the block.

Good luck. It's been a while since I made one of these, but I remember that the hardest, most tedious part is stringing it up.

I though I’d share this info to contribute to improving the plans. Mileage may vary!

The article from the Smithsonian talks about using hardwood in the side rails and zither or piano pins.

https://www.si.edu/spotlight/hammered-dulcimer/hdmake

https://www.si.edu/spotlight/hammered-dulcimer/history

 As for the stout nails I had a thought: https://www.modeltrainstuff.com/micro-engineering-g-30-102-large-sp...

These are ½” long model rail spikes. I’m not sure but these may be the same Stewart MacDonald banjo 5th string capo: https://www.stewmac.com/Materials_and_Supplies/Accessories/Capos_an...

 Of course 15 vs 500 is the rub it would be nice if 250 was an option!

I made a similar lap harp and did an instructable for it

https://www.instructables.com/id/Lap-Harp-Psaltery/

I home made flat ended zither pins from nails using a highly technical cold forging process dating back to the earliest recording of blokes in sheds. I hit it with a hammer to flatten the end. Then I used the smallest drill bit in my set (1.6 mm) to make holes I could feed the string through. Pre drill the mounting hole just a tad smaller like you do with regular zither pins and hammer it home.   More details in the instructable and also plans for a tuning tool. Steps 7 and 8 respectively. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Doug Thorsvik posted a video

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

Cigar Box Guitar Slingers - Spokane, 195th Zoom Mtg 03/25/24. Only 1-finger chords, free songbooks here: https://www.cbgslinger.com/download CBG SOF Songbook...
2 minutes ago
A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
16 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
16 hours ago
Kent Thurston updated their profile
17 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
18 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
18 hours ago
Poorness Studios liked A.D.EKER's video
20 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
20 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
22 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->