Working on my 19th cbg build. However, this is just my second build using two pick-ups, 3-way switch w/tone & volume. My first two pick-up build was a humbucker and a piezo. Using a wiring diagram supplied to me by Del Puckett, a well-known and expert cbg builder, I was able to wire this guitar with no problems.

This second build however, has been a son of a beech tree. I used two matching chrome mini-humbuckers from cbgitty for this build and the wiring diagram from the first build. After finishing the wiring, I found everything worked except the volume is on whether the tone knob is turned on or all the way off.

When I click the 3-way switch, I do get sound just from the desired pick-up and no sound from the pick-up not selected. So the volume is not just hard-wired somehow to be on all the time.

At any rate, I double-checked my solder joints, double-checked my wiring diagram to make sure I had everything wired correctly. Couldn't really find anything wrong, and since everything else seemed to be working as expected, I assumed I had a problem with a cold joint somewhere and pulled and re-soldered about half of the wiring, especially all the connections having anything to do with the Volume pot.

After many hours of re-soldering and re-checking every bit of my wiring, I still have volume when the Volume pot is turned all the way down. Nothing I've done has changed the situation. I'm sure this is an issue at least a few other builders have been confronted with, but I haven't been able to find much on this.

Anybody here know what I've done wrong, or what I'm missing when I'm troubleshooting this? Any help would be much appreciated. Getting to the point where I'm about ready to turn this build from potential sales merchandise into firewood!

Views: 239

Replies are closed for this discussion.

Replies to This Discussion

You need to check the volume pot with an ohm meter, by connecting to the correct 2 leads and turn the control knob back & forth. i.e. 10K pot if it doesn't change pot NG.

Thanks for the tip! Sounds foolproof. All I need to do is buy an ohm meter. Will do that ASAP.

Could you post a copy of the wiring diagram, please? 

Trying but the site doesn't seem to want to download the file.

That's OK, I'll wait.

Hey, the diagram gpeg wouldn't download, so here's the link to the video where the wiring diagram I used is shown. The video shows the actual wiring, the diagram is at the end, starting at 4:20.

https://youtu.be/eBP-4shteCo

You say the volume is on when you turn the tone knob... The tone knob isn't supposed to affect the volume... Just making sure....

No didn't mean to give the impression I was talking about the tone knob. Strictly talking about having volume even with the volume knob turned all the way off. Tone control seems to be working fine, as is everything else.

Just read my original post and saw I said tone knob. DUH. Don't know how that popped out of my brain. Too long ago to edit, but anyway just the volume pot.

To the two or three folks who offered any kind of response to my post for help, I replaced the volume pot with a new one and still had the same issue ~ volume is on at same level no matter what you do with the volume knob.

I was sure somebody here would know what was wrong and have the solution. Pretty disappointed to find this place is basically an empty forum. No worries. I'll figure it out on my own. 

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Discussion Forum

Cutting deep boxes in half

Started by Justin Stanchfield. Last reply by Taffy Evans Mar 20. 9 Replies

Attention 1st time builders!

Started by BrianQ.. Last reply by MadGomer Feb 27. 2 Replies

Brickhouse CBG Wiring

Started by Ian Boyd. Last reply by Ian Boyd Dec 11, 2023. 1 Reply

Fretless fret markers

Started by Michael Myers. Last reply by Michael Myers Apr 20, 2023. 8 Replies

canjo building and tuning

Started by Brenda. Last reply by MadGomer Dec 3, 2022. 5 Replies

Minimum tools needed

Started by Wichita Sam. Last reply by Taffy Evans Nov 14, 2022. 21 Replies

High G problem

Started by Michael Myers. Last reply by Taffy Evans Nov 3, 2022. 4 Replies

Doubling the high string

Started by Robert Killen. Last reply by Paul Craig Oct 14, 2022. 23 Replies

Aluminum License Plate

Started by Larry Sobol. Last reply by Larry Sobol Oct 1, 2022. 6 Replies

C. B. Gifty three string fretless kits.

Started by jon neet. Last reply by Taffy Evans Aug 16, 2022. 6 Replies

Frettin' and stainin'

Started by Doug Laffin. Last reply by Order99 Aug 11, 2022. 4 Replies

Bolt on neck to a set neck body?

Started by Paul Craig. Last reply by Paul Craig Jul 17, 2022. 14 Replies

Locations

Started by Roy Smith. Last reply by the anonymous pick May 15, 2022. 2 Replies

Help please re Bento Box Uke "nut"

Started by Al Lobe. Last reply by BrianQ. May 10, 2022. 18 Replies

Clarification on pick ups

Started by Michael Myers. Last reply by Taffy Evans May 6, 2022. 5 Replies

Licence plate cbg

Started by Michael Myers. Last reply by Michael Myers May 2, 2022. 5 Replies

Builder's Tips

Started by Wichita Sam. Last reply by MadGomer Feb 23, 2022. 2 Replies

Getting there but needing advice/help please.

Started by Lionhound. Last reply by MadGomer Feb 18, 2022. 8 Replies

Tres Cubano Build

Started by Paul Craig. Last reply by Paul Craig Dec 9, 2021. 18 Replies

CB Gitty Country Roads Banjo kit

Started by Ken Hope. Last reply by Christopher G Daniels Nov 29, 2021. 4 Replies

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->