Have a question for the wisdom of the group.  I'm about to start my 2nd build, with a CB Gitty concert uke kit on the way.  I have a box I'd like to use, that's about 10" x 7" x 2-1/2" (see pic #1):My question is about the "top" of the box, the side shown above.  The top is solid with wood strips making a frame around the edge, with the bottom strip about 1-1/2" wide; each strip is about a 1/4" thick (there are similar strips on all sides except the back).  Here's a close up that shows the width:My question is if I make this side the front of the uke and put a shim under the bridge to match the height of the wider strip, will this have a dramatically negative impact on the ability for this side to vibrate?  I could remove the strips -- they are just glued on -- but I like the look of the top as is.  I'm also thinking about cutting out the sound hole so to preserve the wreath, including the center of the wreath.

Any advice?  Thanks!

Views: 154

Reply to This

Replies to This Discussion

Most wooden boxes (cigar boxes, wine boxes, etc) are not built with what would be considered good "tone wood". Additionally, most boxes are quite thick by comparison to purposed built string instrument boxes (acoustic guitars, violins, etc). Bottom line is that the boxes we all tend to use are not great acoustically and the box tops are not going to vibrated noticeably no matter how you set it up.

That is, however, no reason not to utilize your favorite boxes. If adequate sound holes (or F holes) are used in the box, volume is reasonable. Also, you'll notice that almost all box guitars use an amplifier (pickup) of one type or another to get the volume and tone we all desire.

So, use your box (top up) with a bridge spacer. With good sound holes, it should work out fine. You may think about installing a pickup, just in case.

Hi, my suggestion is maybe not put an infill across the top, but to make the bridge higher instead.

You could also consider an infil strip but not glue it in place, play to test, then use a higher bridge and test, I suspect the higher bridge system would offer less resistance to a vibrating top and work better.

Taff

I agree with Tom and Taffy. I definitely recommend studying up on f holes. They can make a big difference. More wood will reduce vibration, so I agree about making the bridge higher, but not filling in the entire space with a shim. Plus, it’s probably going to look better with more of the original top showing.

Bridge spacer (height), good sound holes and maybe pickups.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
12 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
12 hours ago
Kent Thurston updated their profile
12 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
13 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
13 hours ago
Poorness Studios liked A.D.EKER's video
15 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
15 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
18 hours ago
A.D.EKER commented on A.D.EKER's video
21 hours ago
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
21 hours ago
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->