Learn the hard way, glued neck to Box bottom, now needs removal, any ideas short of cutting/slicing out with flat thin bladed saw?

Views: 271

Reply to This

Replies to This Discussion

Heat & a thin metal spatula? Maybe a pic would help?or try google?

Yes, post pics. There might be a hidden workaround you haven't noticed yet. 

What kind of glue?

Titebond

I had to remove a fretboard glued to a neck with Titebond III. I heated up the glue joint using a propane camping heater. My best recollection is that it took about 8-10minutes of moving the neck forward and back in front of the heat source to soften the glue sufficiently to easily pull the fretboard away from the neck. Not shilling for these guys, but the propane heater head was from Harbor Freight, @ $40.00. Threads onto a portable bar-b-que tank, heats my garage up pretty well for git buildin' on 50 degree days. That's pretty cold for So. Cal and an old man. I suppose that any good, hot, safe heat source can resolve a glue removal issue.

If you don’t have access to a neck steamer then the next best thing is an adjustable heat gun. Heat it up till you can pry a thin spatula underneath & then just work it away from the box,PATIENTLY while heating the area you’re prying. takes a little time, so work slowly for the best results? Good luck 

Hi Brent, I would like to know what went wrong to be able to offer a reliable remedy. Like lll Grean said a photo would help. There could be an easier fix.

it would also help others avoid the mistake.

Taff

Glued the neck to Box bottom with supports then found out later the neck was too high for micro pup surface mount pu clearance.

Hi, thanks Brent. Would placing a suitable thickness wooden shim under the pickup work. It could hidden under pickup by being same size, or made a fancy feature piece if nice timber.

Taff

I need to lower the pickup, neck is too high. Considering mounting the pickup under the lid so maybe a flush fir on top using a cover

Before building any guitar, I recommend to figure out what scale you want. From there, planning the position of the neck and pickups would be a lot easier.

What I do, I have a 2x4 that acts as my mannequin of planning scales and positioning of bridge and pickups.  A scale length is measured from the nut to the bridge area.  Lets say you would like to build a 25" scale; then you would measure with a ruler, 25 inches from the bone nut to the bridge (or tail too if its a wraparound). That should give you a clearer idea where to go when building.

Hi again, sorry Brent I'm confused. If the neck is too high [which is normally referenced off the face of the top] that to me means the fingerboard is too high so the strings would also be too high. This would put the strings further away from the pickup I would have thought.

On the other side of the coin, if the neck is too low,- so that the fingerboard is level with or below the top of the box -  then the strings would also be too low and too close to the pickup. Like the man said earlier a picture is worth a thousand words.

Taff

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

Dar Stellabotta posted a video

A Cigar Box Guitar Six Stringer Built by Louie Lamanna

This video is the unboxing and the demonstration of a beautiful, six stringer built by Louie Lamanna. Join Louie and I June 15 at the second annual Pittsburg...
1 hour ago
Doug Thorsvik commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter to you too Andries! The passion is definitely in full swing. Turns out I’m…"
1 hour ago
A.D.EKER commented on Doug Thorsvik's video
Thumbnail

Hail the Resurrection Day: 2-String Violin Chugger Cigar Box Guitar

"Happy Easter Doug ! the Passion is in full swing !"
2 hours ago
A.D.EKER commented on Ricky D's photo
2 hours ago
A.D.EKER commented on A.D.EKER's video
2 hours ago
Keith Rearick liked Doug Thorsvik's video
6 hours ago
Keith Rearick liked A.D.EKER's video
6 hours ago
Keith Rearick liked Doug Thorsvik's video
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago
Keith Rearick liked Ricky D's photo
6 hours ago

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->