Can anyone tell me their experience with the best pick up for License plate guitars?

Views: 418

Reply to This

Replies to This Discussion

I mostly use those chrome single coil pups with round ends. Makes it pretty easy to install by drilling holes for either end, then removing the metal between the holes with a sabre saw, then filing til its a nice fit. Piezo disks can work but I don't like the sound as much. But with the disk you don't have to cut any metal. Here's an example with the single coil:

Really no options, preference more than anything, any pickup will do? members are using both piezo & magnetic pickups with good results? Cheers 

Yes, I wouldn’t run a piezo without a preamp, they’re just to sterile without. Don’t forget you can change the tone peaks of the pickups response by experimenting with different capacitors as well as your amps settings. Cheers 

The first one I made with a single coil sized rail humbucker and it was a pain in the butt. The next 3 with MGB mini box buckers. It's so much easier not to have to cut the plate, box and neck.  : )

I found all this information very valuable. I too, hate the thought of cutting into a plate for a pick up. MGB Mini Box buckers I have to look up. Which I don't see in the cb gitty lineup. thanks a million everyone. I think I'll be going with magnetic pick up.

Wow never knew ! Thank you!

Robbie, no need to cut the plate for a pup, just mount it UNDER the plate, barely touching and you can pick and chose to suit, it will pick up string and plate vibrations very well, and much more adjustable than a pup through the plate

Something new again! Thank you for the idea!

wait a sec!- I'm a raw beginner and trying to understand the difference with piezos. From what I understand, regular electromagnetic pickups only pick up vibrations from metal strings. That's why you can make an electric guitar from a solid piece of wood. Then, for the most part, in CBGs, the cigar box itself and the license plate would basically be decorative/structural. (unless maybe you also have a microphone or you are playing low volumes and/or solo, then maybe that lets the natural resonances come into play? This is where my lack of experience makes me unable to comment definitively)  

It is the piezos that pick up the vibrations of wood/cardboard and/or metallic resonators, and you are specifically amplifying the "natural" sound electrically. The fact that that you can use the same plugs, cords and amps is a matter of convenience. In a sense, they are two different instruments. I mean, I know "there are no rules" but, you can't escape the laws of physics.  

The inclusion of "reso" in the title of your question makes me think you'd want a rod piezo (like those on CBGitty), or an expensive pro piezo pickup made for acoustics. There are piezo pickups that specifically make semi-hollow electric guitars sound more like acoustics. This also explains why CBGitty has only a few (cheaper) electric pickups, and why the 2 string bass kit is so much more expensive than the guitars, banjos, ukes and diddly-bos. 

On the other hand, if you're CBG isn't particularly loud, and/or you're used to playing electric, electromagnetic pickups with metal strings would be the way to go. But, for one thing, I have no idea to how the regular pickup reacts to the metal plate. Darryls' solution might actually be a significant improvement, rather than a matter of convenience.

wow, sorry to reply to my own question, but I packed a lot in there, I really should start my own question, but to explain parts where I got a little fuzzy:

1. By "two different instruments"- I mean CBGs with electromagnetic pickups and CBGs with piezos are almost two different instruments, maybe I should say 2 classes or 2 different types of instruments. The possibility for a combo CBG blows my mind!

2. The bass is different because it needs electromagnetic pickups unless you wanted to build with a suitcase or something much larger than a cigar box body. I hope CBGitty or MGB starts selling washtubs for a 1 string washtub bass. I saw a Shane Speal video where he shows off a washtub bass with a rod piezo. With a weed-wacker string, too. Awesome!

3. I call the electromagnetic pickups "regular" in the next to last sentence, because that's how I think of them. I never knew what piezos were until recently, or that I could get them for just a couple of cents each. It's actually pretty exciting! I'm still trying to figure out how a steel plate would effect an electromagnetic pickup. Maybe I'll mount a plate on my Les Paul to find out! that might drive my guitar repair shop guy nuts. ;P

Great thoughts! After all, it is the sound that we personally like that we are all looking for. Some different than others. Mounting the magnetic pup under the plate sounds less intrusive on the plate but much more intrusive on the neck cutout for the pup.

RSS

The Essential Pages

New to Cigar Box Nation? How to Play Cigar Box GuitarsFree Plans & How to Build Cigar Box GuitarsCigar Box Guitar Building Basics

Site Sponsor

Recommended Links & Resources


Forum

crossover guitar.

Started by Timothy Hunter in Other stuff - off topic, fun stuff, whatever. Last reply by Timothy Hunter Mar 21. 11 Replies

Tune up songs

Started by Ghostbuttons in Building Secrets, Tips, Advice, Discussion. Last reply by Timothy Hunter Mar 9. 5 Replies

Duel output jacks

Started by Justin Stanchfield in Building Secrets, Tips, Advice, Discussion. Last reply by Taffy Evans Mar 8. 6 Replies

How to Get Your Own Music on Spotify

Started by Cigar Box Nation in Feature Articles. Last reply by Southern Ray Feb 21. 2 Replies

CB Bass Guitar

Started by Mi Rankin in Building Secrets, Tips, Advice, Discussion. Last reply by Justin Stanchfield Jan 27. 5 Replies

Latest Activity

A.D.EKER commented on A.D.EKER's video
Thumbnail

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

"Thank you Poorness ! for loving it ! appreciated!"
15 hours ago
Southern Ray replied to Timothy Hunter's discussion just came accross this pickup idea on youtube.
" Very interesting. Thank you Timothy!"
15 hours ago
Kent Thurston updated their profile
15 hours ago
Southern Ray posted a photo

Punch Project!

She now sports gold metal CBGitty knobs, speaker and an Artec 2.5 watt speaker. Finished this in…
16 hours ago
Southern Ray posted a photo

Project Punch!

Gonna finally get back on this long-delayed project that is more than half complete. (The matching…
16 hours ago
Poorness Studios liked A.D.EKER's video
18 hours ago
BrianQ. left a comment for Rob (Uker) Porras
"Hope this helps?"
18 hours ago
Doug Thorsvik commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"I appreciate the kind words Papa D! I have always loved the look of these cigar boxes. Glad to have…"
21 hours ago
A.D.EKER commented on A.D.EKER's video
yesterday
A.D.EKER posted a video

Im Troubled (Tribute) Mc K Morganfield by BCB - A.D .Eker 2024.

The recorded History By Alan Lomax for the library of Congres of the Blues, from Mc Kinley Morganfield (Aka Muddy Waters) the in this take recorded Tribute ...
yesterday
Papa D commented on Doug Thorsvik's photo
Thumbnail

Dueling Flatheads

"Beautiful..Nice work Doug.."
yesterday
Papa D commented on Papa D's photo
Thumbnail

american1 Sun Glo

"Thanx AGP & Doug..  4 more coming soon"
yesterday

Music

© 2024   Created by Ben "C. B. Gitty" Baker.   Powered by

Badges  |  Report an Issue  |  Terms of Service

\uastyle>\ud/** Scrollup **/\ud.scrollup {\ud background: url("https://storage.ning.com/topology/rest/1.0/file/get/963882636?profile=original") no-repeat scroll 0 0 transparent;\ud bottom: 25px;\ud display: inline !important;\ud height: 40px;\ud opacity: 0.3 !important;\ud position: fixed;\ud right: 30px;\ud text-indent: -9999px;\ud width: 40px;\ud z-index: 999;\ud}\ud.scrollup:hover {\ud opacity:0.99!important;\ud}\ud \uascript type="text/javascript">\ud x$(document).ready(function(){\ud x$(window).scroll(function(){\ud if (x$(this).scrollTop() > 100) {\ud x$('.scrollup').fadeIn();\ud } else {\ud x$('.scrollup').fadeOut();\ud }\ud });\ud x$('.scrollup').click(function(){\ud x$("html, body").animate({ scrollTop: 0 }, 600);\ud return false;\ud });\ud });\ud \ua!-- End Scroll Up -->